On Wed, Feb 06, 2008 at 11:13:07PM +0000, Jacob Meuser wrote:
> On Wed, Feb 06, 2008 at 11:45:45PM +0100, Markus Bergkvist wrote:
> > Can't burn DVD images after this update.
> >
> > $ sudo growisofs -dvd-compat -Z /dev/rcd1c=image.img
> > WARNING: /dev/rcd1c already carries isofs!
> > About to execute 'builtin_dd if=image.img of=/dev/rcd1c obs=32k seek=0'
> > :-( failed to create thread: Operation not supported by device
Same results here, except without the warning. I have never used dvd+rw on
openbsd before this version. Formatting a DVD+RW seems to work.
Same results on an Internal IDE Samsung, and a new USB2 LG (not in the dmesg).
> what type of media?
DVD+R,DVD+RW
> is there really an ISO there already?
Yes
> does it work without using sudo?
No.
---
# growisofs -dvd-compat -Z /dev/rcd0c=image.iso
Executing 'builtin_dd if=output.mpg of=/dev/rcd0c obs=32k seek=0'
:-( failed to create thread: Operation not supported by device
---
$ dvd+rw-mediainfo /dev/rcd0c
INQUIRY: [TSSTcorp][CD/DVDW TS-H552B][TS10]
GET [CURRENT] CONFIGURATION:
Mounted Media: 1Ah, DVD+RW
Current Write Speed: 2.0x1385=2770KB/s
Write Speed #0: 2.0x1385=2770KB/s
Speed Descriptor#0: 00/2295103 [EMAIL PROTECTED]/s [EMAIL PROTECTED]/s
READ DVD STRUCTURE[#0h]:
Media Book Type: 00h, DVD-ROM book [revision 0]
Media ID: RICOHJPN/W01
Legacy lead-out at: 2295104*2KB=4700372992
READ DISC INFORMATION:
Disc status: complete
Number of Sessions: 1
State of Last Session: complete
Number of Tracks: 1
BG Format Status: complete
READ FORMAT CAPACITIES:
formatted: 2295104*2048=4700372992
26h(0): 2295104*2048=4700372992
READ TRACK INFORMATION[#1]:
Track State: complete
Track Start Address: 0*2KB
Free Blocks: 0*2KB
Track Size: 2295104*2KB
FABRICATED TOC:
Track#1 : [EMAIL PROTECTED]
Track#AA : [EMAIL PROTECTED]
Multi-session Info: [EMAIL PROTECTED]
READ CAPACITY: 2295104*2048=4700372992
---
OpenBSD 4.2-current (GENERIC) #0: Wed Jan 30 18:43:15 EST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2147020800 (2047MB)
avail mem = 2073542656 (1977MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.2 @ 0xf0000 (40 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 01/31/2005
bios0: soyocomputer nForce
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices HUB0(S5) HUB1(S4) USB0(S3) USB1(S3) USB2(S3) F139(S3)
MMAC(S5) MMCI(S5) UAR1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (HUB0)
acpiprt2 at acpi0: bus 1 (AGPB)
acpiprt3 at acpi0: bus -1 (HUB1)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 95 degC
acpibtn0 at acpi0: PWRB
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3000+, 2020.12 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: AMD errata 86, 89, 97, 104 present, BIOS upgrade may be required
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce3 PCI Host" rev 0xa4
agp at pchb0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce3 ISA" rev 0xa6
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce3 SMBus" rev 0xa4
iic0 at nviic0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC3200CL3.0
iic1 at nviic0
iic1: addr 0x4e 00=2a 01=02 02=10 03=72 05=80 06=0e 09=c8 0a=37 0e=e0 0f=ff
3e=37 48=37 4a=37 4e=37 fe=37 words 00=2aff 01=02ff 02=10ff 03=72ff 04=00ff
05=80ff 06=0e
ff 07=00ff 08=00ff 09=c8ff 0a=37ff 0b=00ff 0c=00ff 0d=00ff 0e=e0ff 0f=ffff
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce3 USB" rev 0xa5: irq 5, version
1.0, legacy support
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce3 USB" rev 0xa5: irq 5, version
1.0, legacy support
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce3 USB" rev 0xa2: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
nfe0 at pci0 dev 5 function 0 "NVIDIA nForce3 LAN" rev 0xa5: irq 11, address
04:4b:80:80:80:03
icsphy0 at nfe0 phy 1: ICS1893 10/100 PHY, rev. 1
auich0 at pci0 dev 6 function 0 "NVIDIA nForce3 AC97" rev 0xa2: irq 11, nForce3
AC97
ac97: codec id 0x434d4961 (C-Media Electronics CMI9739)
audio0 at auich0
pciide0 at pci0 dev 8 function 0 "NVIDIA nForce3 IDE" rev 0xa5: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y120L0>
wd0: 16-sector PIO, LBA, 117246MB, 240119808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW TS-H552B, TS10> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ppb0 at pci0 dev 10 function 0 "NVIDIA nForce3 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 2
vga1 at pci1 dev 7 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce3 PCI-PCI" rev 0xa4
pci2 at ppb1 bus 1
"ATI Radeon 9200 SE Sec" rev 0x01 at pci2 dev 0 function 0 not configured
"ATI Radeon 9200 SE" rev 0x01 at pci2 dev 0 function 1 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
mpu0 at isa0 port 0x330/2: generic MPU-401 compatible
midi0 at mpu0: <MPU-401 MIDI UART>
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x290/8: IT8712F rev 0x06
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
ugen0 at uhub1 port 3 "American Power Conversion Back-UPS XS 1500 LCD FW:837.H5
.D USB FW:H5" rev 1.10/1.01 addr 2
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
auich0: measured ac97 link rate at 47992 Hz, will use 48000 Hz
