Can't burn DVD images after this update.

$ sudo growisofs -dvd-compat -Z /dev/rcd1c=image.img
WARNING: /dev/rcd1c already carries isofs!
About to execute 'builtin_dd if=image.img of=/dev/rcd1c obs=32k seek=0'
:-( failed to create thread: Operation not supported by device


Switched back to dvd+rw-tools-5.21.4.10.8p0 and it works fine again.

$ sudo growisofs -dvd-compat -Z /dev/rcd1c=image.img


WARNING: /dev/rcd1c already carries isofs!
About to execute 'builtin_dd if=image.img of=/dev/rcd1c obs=32k seek=0'
/dev/rcd1c: "Current Write Speed" is 4.1x1385KBps.
...

/Markus

OpenBSD 4.2-current (GENERIC) #8: Fri Jan 18 22:21:14 CET 2008
    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 2400+ ("AuthenticAMD" 686-class, 256KB L2 cache) 2 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 1073250304 (1023MB)
avail mem = 1029881856 (982MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/14/04, BIOS32 rev. 0 @ 0xfb470, SMBIOS rev. 2.2 @ 0xf0000 (43 entries) bios0: vendor Phoenix Technologies, LTD version "ASUS A7N8X Deluxe ACPI BIOS Rev 1008" date 09/14/2004
bios0: ASUSTeK Computer INC. A7N8X
apm at bios0 function 0x15 not configured
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices HUB0(S5) HUB1(S4) USB0(S4) USB1(S4) USB2(S3) F139(S3) MMAC(S5) MMCI(S5) UAR1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (HUB0)
acpiprt2 at acpi0: bus 3 (AGPB)
acpiprt3 at acpi0: bus 2 (HUB1)
acpicpu0 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xd000 0xd0000/0x4000! 0xd4000/0x1800 0xd6000/0x800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce2 PCI" rev 0xa2
agp at pchb0 not configured
"NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 1 not configured
"NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 2 not configured
"NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 3 not configured
"NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 4 not configured
"NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce2 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce2 SMBus" rev 0xa2
iic0 at nviic0
spdmem0 at iic0 addr 0x50: 256MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 256MB DDR SDRAM non-parity PC2700CL2.5
spdmem2 at iic0 addr 0x52: 512MB DDR SDRAM non-parity PC2700CL2.5
iic1 at nviic0
asbtm0 at iic1 addr 0x2d
wbenv0 at iic1 addr 0x2e: W83L785TS-L
lm1 at iic1 addr 0x2f: W83791D
iic1: addr 0x48 00=7f 01=00 02=4b 04=7f 06=4b 07=50 08=7f 0a=4b 0b=50 0c=7f 0e=4b 0f=50 10=7f 12=4b 13=50 14=7f 16=4b 17=50 18=7f 1a=4b 1b=50 1c=7f 1e=4b 1f=50 20=7f 22=4b 23=50 24=7f 26=4b 27=50 28=7f 2a=4b 2b=50 2c=7f 2e=4b 2f=50 30=7f 32=4b 33=50 34=7f 36=4b 37=50 38=7f 3a=4b 3b=50 3c=7f 3e=4b 3f=50 40=7f 42=4b 43=50 44=7f 46=4b 47=50 4a=4b 4b=50 4d=08 4e=4b 4f=50 50=7f 52=4b 53=50 54=7f 56=4b 57=50 58=7f 5a=4b 5b=50 5c=7f 5e=4b 5f=50 60=7f 62=4b 63=50 64=7f 66=4b 67=50 68=7f 6a=4b 6b=50 6c=7f 6e=4b 6f=50 70=7f 72=4b 73=50 74=7f 76=4b 77=50 78=7f 7a=4b 7b=50 7c=7f 7e=4b 7f=50 80=7f 82=4b 83=50 84=7f 86=4b 87=50 88=7f 8a=4b 8b=50 8c=7f 8e=4b 8f=50 90=7f 92=4b 93=50 94=7f 96=4b 97=50 98=7f 9a=4b 9b=50 9c=7f 9e=4b 9f=50 a0=7f a2=4b a3=50 a4=7f a6=4b a7=50 a8=7f aa=4b ab=50 ac=7f ae=4b af=50 b0=7f b2=4b b3=50 b4=7f b6=4b b7=50 b8=7f ba=4b bb=50 bc=7f be=4b bf=50 c0=7f c2=4b c3=50 c4=7f c6=4b c7=50 ca=4b cc=7f cd=08 ce=4b cf=50 d0=7f d2=4b d3=50 d4=7f d6=4b d7=50 d8=7f da=4b db=50 dc=7f de=4b df=50 e0=7f e2=4b e3=50 e4=7f e6=4b e7=50 e8=7f ea=4b eb=50 ec=7f ee=4b ef=50 f0=7f f2=4b f3=50 f4=7f f6=4b f7=50 f8=7f fa=4b fb=50 fc=7f fe=4b ff=50 words 00=ffff 01=08ff 02=4b00 03=5000 04=7f00 05=08ff 06=4b00 07=5000 08=7f00 09=08ff 0a=4b00 0b=5000 0c=7f00 0d=08ff 0e=4b00 0f=5000 iic1: addr 0x49 01=00 02=4b 05=00 06=4b 07=50 0a=4b 0b=50 0e=4b 10=32 12=4b 16=4b 17=50 1a=4b 1b=50 1e=4b 1f=50 22=4b 24=32 26=4b 29=00 2a=4b 2c=32 2e=4b 32=4b 33=50 36=4b 37=50 3a=4b 3c=32 3e=4b 42=4b 43=50 46=4b 48=32 49=00 4a=4b 4b=50 4e=4b 4f=50 50=32 54=32 55=00 56=4b 59=00 5a=4b 5b=50 5e=4b 60=32 62=4b 65=00 66=4b 67=50 6a=4b 6c=32 6e=4b 70=32 72=4b 74=32 76=4b 79=00 7a=4b 7b=50 7e=4b 7f=50 82=4b 83=50 86=4b 88=32 8a=4b 8d=00 8e=4b 8f=50 92=4b 93=50 96=4b 98=32 9a=4b 9c=32 9e=4b a0=32 a1=00 a2=4b a6=4b a7=50 aa=4b ab=50 ae=4b af=50 b2=4b b4=32 b5=00 b6=4b b9=00 ba=4b bb=50 be=4b c0=32 c2=4b c5=00 c6=4b c7=50 ca=4b cc=32 ce=4b d2=4b d3=50 d6=4b d8=32 da=4b de=4b df=50 e1=00 e2=4b e4=32 e6=4b ea=4b ec=32 ee=4b f2=4b f4=32 f6=4b fa=4b fb=50 fe=4b words 00=3200 01=00ff 02=4b00 03=5000 04=3200 05=00ff 06=4b00 07=5000 08=3200 09=00ff 0a=4b00 0b=5000 0c=3200 0d=00ff 0e=4b00 0f=5000 ohci0 at pci0 dev 2 function 0 "NVIDIA nForce2 USB" rev 0xa3: irq 12, version 1.0, legacy support ohci1 at pci0 dev 2 function 1 "NVIDIA nForce2 USB" rev 0xa3: irq 12, version 1.0, legacy support
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce2 USB" rev 0xa3: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
nfe0 at pci0 dev 4 function 0 "NVIDIA nForce2 LAN" rev 0xa1: irq 11, address 00:e0:18:f7:72:4f
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
"NVIDIA nForce2 Audio" rev 0xa2 at pci0 dev 5 function 0 not configured
auich0 at pci0 dev 6 function 0 "NVIDIA nForce2 AC97" rev 0xa1: irq 11, nForce2 AC97
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
ppb0 at pci0 dev 8 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3
pci1 at ppb0 bus 1
"ESS ES2898 Modem" rev 0x03 at pci1 dev 10 function 0 not configured
pciide0 at pci0 dev 9 function 0 "NVIDIA nForce2 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC35L120AVV207-1>
wd0: 16-sector PIO, LBA48, 117800MB, 241254720 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, LTR-48246S, SS0A> SCSI0 5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi1 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <LITE-ON, DVDRW SOHW-1693S, KS02> SCSI0 5/cdrom removable
cd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
ppb1 at pci0 dev 12 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3
pci2 at ppb1 bus 2
xl0 at pci2 dev 1 function 0 "3Com 3c9201 100Base-TX" rev 0x40: irq 12, address 00:26:54:09:fc:39
acphy0 at xl0 phy 2: AC101L 10/100 PHY, rev. 1
ppb2 at pci0 dev 30 function 0 "NVIDIA nForce2 AGP" rev 0xa2
pci3 at ppb2 bus 3
vga1 at pci3 dev 0 function 0 "ATI Radeon 9500 Pro" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "ATI", unknown product 0x4e65 (class display subclass miscellaneous, rev 0x00) at pci3 dev 0 function 1 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
biomask fd65 netmask fd65 ttymask ffe7
mtrr: Pentium Pro MTRR support
uhub3 at uhub2 port 2 "Texas Instruments TUSB2046 hub" rev 1.10/1.25 addr 2
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech HID compliant keyboard" rev 1.10/1.80 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 1 configuration 1 interface 1 "Logitech HID compliant keyboard" rev 1.10/1.80 addr 3
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhidev2 at uhub3 port 2 configuration 1 interface 0 "Logitech USB RECEIVER" rev 1.10/25.10 addr 4
uhidev2: iclass 3/1
ums0 at uhidev2: 16 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev3 at uhub3 port 3 configuration 1 interface 0 "Justcom Technology USB KVM Switch" rev 1.10/1.00 addr 5
uhidev3: no report descriptor
uhidev4 at uhub3 port 3 configuration 1 interface 1 "Justcom Technology USB KVM Switch" rev 1.10/1.00 addr 5
uhidev4: iclass 3/1
ums1 at uhidev4: 3 buttons and Z dir.
wsmouse1 at ums1 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
auich0: measured ac97 link rate at 47994 Hz, will use 48000 Hz

Jacob Meuser wrote:
update to latest version.

works fine for me but I have only one DVD burner and only dvd+r media
at the moment.  please test and let me know either good or bad.


Reply via email to