On Sat, Oct 28, 2006 at 08:18:05AM +0100, Mikolaj Kucharski wrote:
> I'm attaching dmesg which don't has console redirected to pccom0, but
> that is because, as wrote above, cdboot doesn't read my boot.conf file.
If someone was wondering why cdboot(8) didn't read /etc/boot.conf file,
here is an answer, from mkhybrid(8):
-l Allow full 32 character filenames. Normally the
ISO9660 filename will be in an 8.3 format which is
compatible with MS-DOS, even though the ISO9660
standard allows filenames of up to 32 characters.
If you use this option, the disc may be difficult
to use on a MS-DOS system, but this comes in handy
on some other systems (such as the Amiga). Use
with caution.
..and some commands to configrm that:
$ isoinfo -f -i cdrom.iso | grep -i etc/boot
/ETC/BOOT.CONF;1
/HOME/ARCHIVES/ETC/BOOT.CONF;1
..before was:
$ isoinfo -f -i old.iso | grep -i etc/boot
/ETC/BOOT.CON;1
/HOME/ARCHIVES/ETC/BOOT.CON;1
Atteched dmesg(8) from new iso, with console and getty configured for
pccom0.
$ qemu ... -serial stdio -nographic
(qemu) >> OpenBSD/i386 CDBOOT 1.05
Welcome to the OpenBSD/i386
boot>
booting cd0a:/bsd: 5509536+868816 [52+281584+262836]=0x69a3bc
entry point at 0x200120
[ using 544844 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.0-current (GENERIC_CD) #2: Wed Oct 25 09:50:17 IST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC_CD
--
best regards
q#
OpenBSD 4.0-current (GENERIC_CD) #2: Wed Oct 25 09:50:17 IST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC_CD
cpu0: QEMU Virtual CPU version 0.8.1 ("GenuineIntel" 686-class) 2.44 GHz
cpu0:
FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
real mem = 133787648 (130652K)
avail mem = 114606080 (111920K)
using 1663 buffers containing 6811648 bytes (6652K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(37) BIOS, date 06/23/99, BIOS32 rev. 0 @ 0xf9f00
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfa1e0/128 (6 entries)
pcibios0: PCI Interrupt Router at 000:01:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
wd0: 16-sector PIO, LBA48, 1024MB, 2097152 sectors
wd0(pciide0:0:0): using PIO mode 0, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU CD-ROM, 0.8.> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 0, DMA mode 1
vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ne3 at pci0 dev 3 function 0 "Realtek 8029" rev 0x00: irq 11, address
52:54:00:12:34:56
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16450, no fifo
pccom0: console
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: density unknown
fd1 at fdc0 drive 1: density unknown
biomask e76d netmask ef6d ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: CPU supports MTRRs but not enabled
nvram: invalid checksum
wd0: no disk label
dkcsum: wd0 matches BIOS drive 0x80
root on cd0c
rootdev=0x602 rrootdev=0xf02 rawdev=0xf02
WARNING: preposterous time in file system
clock: unknown CMOS layout
WARNING: file system time much less than clock time
