I did that and will put together the results. I saw falloff between shutter speeds - 1/45, 1/90, and 1/180 had more pronounced banding that 1/60 and 1/125. But all those speeds had some banding. All speeds <1/45 showed no banding and all > 1/180 showed about the same degree of banding. I'll label the images and put them into a single file.

Mark

On 3/2/2017 4:26 PM, Larry Colen wrote:

<signal processing geek>
Mark, as an experiment, please try this at various multiples of 1/120 second (83mSec):
1/120, 2/120, 3/120, 4/120, 5/120 ->  1/120, 1/60, 1/40, 1/30, 1/24, 1/20

Since the light is effectively a rectified sine wave, any time you integrate (expose) over a half power cycle (1/20), you should get exactly a full cycle of the light, and it should come out even with no banding.

If you do run an experiment where you just cycle through exposure times from, for example, 1/500 down to 1/5, at 1/3 stop (1dB) and post the results, that should be a very cool demonstration of aliasing/nyquist rate etc. and I've got some science teacher friends who'd probably really appreciate that gallery being up on the web.
</signal processing geek>



--
PDML Pentax-Discuss Mail List
[email protected]
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Reply via email to