Looking from the rear of the camera. On the right, under the film advance lever, you have a partially visible screw. Looking from the right SIDE of the camera (in profile with the lens facing to the right, you can see the hinge for the back - Is there a screw on the side (not the back) of the camera, that holds the metal top of the camera on?
ppro > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Eduardo > Sent: Friday, March 01, 2002 9:16 AM > To: [EMAIL PROTECTED] > Subject: Re: Spotmatic - help needed.... > > > > > It sounds like a transitional model. The two screws baffles me though. > I'd need to see pictures to be sure we're > talking about the same thing. > > Yes, it has both screws. If you look at the body from it's right side, > there's a screw in the exact middle of it's width and just three milimeters > above the back door hinge. > > Upon further inspection, it seems the same screw size was used on three > different places: 1) partially underneath the film advance lever; 2) on the > right (from the back of the camera) side of the top cover; 3) the two outer > screws of the base plate (the ones closer to the tripod socket are smaller). > - > This message is from the Pentax-Discuss Mail List. To unsubscribe, > go to http://www.pdml.net and follow the directions. Don't forget to > visit the Pentax Users' Gallery at http://pug.komkon.org . - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
