> > How the hell do you build buckyballs out of iridium? > It's really quite simple when you know how.
Notes while before fixing: 1. firstly pull out Fire Bat, then hold closely the Brake Bat, there-after proceeds for processings. 2. while finding Gear sets throw out, Be care for the lossings of those attached accessories or, other anti-thing Broken Incidents. Fixing Manners 1. apply solid handle to turn left, while the same time those nuts and Folded items should both tear out, and note while applying adhesive elements, should make drier by dryer, that also makes easy to resolve them. 2. choosing those most suitable axle screws so, that can match well with the adapters. 3. should resolve from the top of the Body by turning left 4. insert the ear-part of the adapter in (aim on) the Body groove (hole), until while it keeps steadly while fixing for HI, putting in the Utmost bottom of the grooves (holes), then there-aftex setting-in the isolating wire and while fixing for MID, just putting in the most suitable depth of the grooves, then setting in the isolating wire, while fixing for LOW, just even setting-in for the shallow parts of the grooves. But not using for isolating wire, that is: Further besides for fixing of LOW, all must (apply) set-in the isolating wires. http://www.engrish.com/ -- Bob -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net
