Hi all, I ve been struggling with a problem for a week now. Any of your help would be really appreciated.
I m using the packetfence official documentation to configure it. https://www.packetfence.org/doc/PacketFence_Installation_Guide.html <https://www.packetfence.org/doc/PacketFence_Installation_Guide.html> I fellowed the documentation for the installation but I m struck at the point 6 (enabling the captive portal). My config: - PacketFence zen 3.10 : IP - -> 192.168.2.53 (reserved ip) - wind servers 2016 : Active directory & dns server IP —> 192.168.2.51 (reserved ip) - Switch Cisco 3750x : IP --> 192.168.5.1 - watchguard : DHCP : IP —> 192.168.5.254 Vlan for registration : 1201 IP -> 192.168.20.50/24 Vlan for normal user1 : 1200 IP -> 192.168.2.50/24 Vlan for normal user2 : 1203 IP -> 192.168.3.50/24 I can connect my users using 802.1x correctly and the radius reply with the right vlan . But when I want to use the captive portal, my guest receive a ip (192.168.20.50) but I can’t see the captive portal. Can anyone assist? Best regards.
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
