I installed on VMWare, what version are you using ie Workstation. Vince etc

On Thu, 04 Jul 2019 at 07:38, Chadwick Boseman via PacketFence-users <
[email protected]> wrote:

> Hi,
> so I've deployed my Packetfence ZEN on VMware, i've followed the
> documentation :
>
>
> https://packetfence.org/doc/PacketFence_Installation_Guide.html#_going_through_the_configurator
>
> and I've reach the testing part 5.7. Testing
> <https://packetfence.org/doc/PacketFence_Installation_Guide.html#_testing>
> If I'm correct,
> 1) by default ZEN is configured to use NAT on VM (The first time I open
> the .ova, the network configuration was set to NAT),
> 2) by default the IP address of the eth0 interface is set to a static
> address
>
> When I try to connect a client (a Windows 10 laptop) to my 2960 switch,
> the authentication prompt popped up, I entered both valid and invalid
> credentials, but the authentication failed,
>
> the documentation said :
> *"To see what’s going on from PacketFence, click on the Auditing tab from
> PacketFence’s admin interface. You should see an entry for the MAC address
> of your Microsoft Windows 7 endpoint" *
>
> but when I checked, there was nothing there..
> My understanding is the switch has no way to communicate with the pf
> server in the VM since it is using NAT..
>
> When I tried to change it to bridged connection to make the PF bridge my
> PC's ethernet connection, the IP address of the PF eth0 didn't change, so I
> change it to a valid IP address from my LAN segment, and I cannot access
> the configurator, or the admin page..
>
> Can anyone help me please..? maybe I missed something or there is
> additional configuration I need for it to work?
>
> Thanks in advance
>
>
>
> _______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to