--On Monday, September 21, 2020 11:40 PM +0000 "CLARKE, ED C" <[email protected]> wrote:

Hello Quanah,

I am using OpenLDAP, on an IBM LinuxONE server, IBM just helped with the
setup. I also was able to test the below on my other ldap server & it
performed as expected & changed the password.

Ok, thanks.

        dn:uid=foxdiv,ou=People,dc=att,dc=com


So this shows the LDAP password change for this user was successful in the LDAP server on pdprfdl4.dadc.sbc.com


        dn:uid=foxdiv,ou=People,dc=att,dc=com

So this shows the LDAP password change for this user was successful in the LDAP server on pdprfsl4.sldc.sbc.com

This would show that the LDAP servers are working correctly, and password modifications to each LDAP server is working correctly. The issue then between the OS and the integration software being used (SSSD etc).

As an aside, I would note that OpenLDAP 2.4.44 is extremely old. I do see that you're using an S390 mainframe, so I'm guessing your options are currently limited in regards to upgrading to a current release. If it ever becomes an issue (i.e., if your setup is doing replication which I would strongly advise against doing with 2.4.44), Symas could provide assistance in this area. Our CTO (who is also the chief architect of the OpenLDAP project) did the original S390 port of OpenLDAP, so we're quite familiar and can provide support for such a build.

Regards,
Quanah

--

Quanah Gibson-Mount
Product Architect
Symas Corporation
Packaged, certified, and supported LDAP solutions powered by OpenLDAP:
<http://www.symas.com>

Reply via email to