On 01/12/21 04:34 PM, Gary Mills wrote: > On Tue, Jan 12, 2021 at 03:10:03PM +0000, Tony Brian Albers wrote: >> I'm having issues getting an analogue (using a 3,5mm jack connector) >> microphone to work properly. > > I've never tried a microphone so I'm of no help there. Audio devices > usually have two inputs (line and microphone) and one output (line). > I wonder if it's listening on the wrong input? > >> It shows up in the mate-volume-control window, but even when it's at >> 100% volume, there's no sound level indication. The mic works, because >> when I test it with >> $ cat </dev/audio >>/tmp/foo.au >> $ cat /tmp/foo.au >>/dev/audio > > Pulseaudio is not involved here, since you are accessing raw devices. > You could use the audioplay command to replace the second command. > I'd expect the same result, but it's worth trying. > > The volume on illumos-based systems is always quite low.
Hmm.. I get the exact same results with audiorecord -v 100 and audioplay. I'm going to try with another mic(headphones actually because I have only the one mic) /tony -- Tony Albers - Systems Architect - IT Development Royal Danish Library, Victor Albecks Vej 1, 8000 Aarhus C, Denmark Tel: +45 2566 2383 - CVR/SE: 2898 8842 - EAN: 5798000792142 _______________________________________________ openindiana-discuss mailing list [email protected] https://openindiana.org/mailman/listinfo/openindiana-discuss
