On 01/12/21 04:17 PM, Udo Grabowski (IMK) wrote: > > > On 12.01.21 16:10, Tony Brian Albers wrote: >> I'm having issues getting an analogue (using a 3,5mm jack connector) >> microphone to work properly. >> >> It shows up in the mate-volume-control window, but even when it's at >> 100% volume, there's no sound level indication. The mic works, because >> when I test it with >> $ cat </dev/audio >>/tmp/foo.au >> $ cat /tmp/foo.au >>/dev/audio >> >> I can hear the words I say, but it's awfully low and the noise level is >> normal. The words are only just audible. >> >> Is there a way that I can use something like mic boost? I've been >> rummaging around in pulseaudio(pacmd etc.) all day now, but I can't find >> anything that's not set to a 100% volume with regards to the microphone. >> >> Any ideas and suggestions are welcome. > > Maybe it's not switched on in the mixer ? > >
I tried $ audioctl set-control -v mic 100 But that only increased the level, and the noise with it. I suppose that's what you mean by "mixer"? /tony -- Tony Albers - Systems Architect - IT Development Royal Danish Library, Victor Albecks Vej 1, 8000 Aarhus C, Denmark Tel: +45 2566 2383 - CVR/SE: 2898 8842 - EAN: 5798000792142 _______________________________________________ openindiana-discuss mailing list [email protected] https://openindiana.org/mailman/listinfo/openindiana-discuss
