Hi Reginal, Peter Thanks for the help. I seem to be getting something from /dev/cua/0 but there seems to be a problem in my installation. Looks like a Software error though. I'll see if it's because I am on a faulty realease.
Thank you for the Help that gets me a few steps further. Greetings Till On 29.04.2018 17:55, Reginald Beardsley via openindiana-discuss wrote: > It should be /dev/cua? > > Here is what I get with Hipster 17.10. First is with a Triplite Keyscan > connected. Second is with it removed. Not sure what the deal is with the > cua0 and cua1 entries. But I seem to recall trying to get a PCI serial port > card to work and giving up. > > Be aware that very few USB to RS232 devices work with Solaris, And in > general it is a horrible can of worms even when they do. > > My canonical test for a new admin at work was to mention "modem". If the > person flinched I knew they were experienced. If they didn't they were > clearly new at this. > > rhb@Hipster:/dev$ ls -l /dev/cua* > lrwxrwxrwx 1 root root 39 Dec 19 19:52 /dev/cua0 -> > ../devices/pci@0,0/isa@1/asy@1,3f8:a,cu > lrwxrwxrwx 1 root root 39 Dec 19 19:52 /dev/cua1 -> > ../devices/pci@0,0/isa@1/asy@1,2f8:b,cu > > /dev/cua: > total 1 > lrwxrwxrwx 1 root root 53 Apr 29 10:43 0 -> > ../../devices/pci@0,0/pci103c,1309@1a,2/device@1:0,cu > rhb@Hipster:/dev$ ls -l /dev/cua* > lrwxrwxrwx 1 root root 39 Dec 19 19:52 /dev/cua0 -> > ../devices/pci@0,0/isa@1/asy@1,3f8:a,cu > lrwxrwxrwx 1 root root 39 Dec 19 19:52 /dev/cua1 -> > ../devices/pci@0,0/isa@1/asy@1,2f8:b,cu > rhb@Hipster:/dev$ > > > -------------------------------------------- > On Sun, 4/29/18, Till Wegmüller <[email protected]> wrote: > > Subject: [OpenIndiana-discuss] Connecting Serial Modem to Illumos (ACM9 > To: [email protected] > Date: Sunday, April 29, 2018, 6:56 AM > > Hello Dear OI Community > > I am trying to connect my Ultimaker to > my OpenIndiana Server. It is a > serial device accessed through a python > software. > > When connecting the USB I can see it > showing up in dmesg: > Apr 29 11:34:36 node02 usba: [ID 349649 > kern.info] usba: no > driver found for interface 1 (nodename: > 'data') of Ultimaker BV > (www.ultimaker.com) Ultimaker 2.0 > Apr 29 11:34:36 node02 usba: [ID 912658 > kern.info] USB 1.10 interface > (usbif2341,10.config1.0) operating at > full speed (USB 1.x) on USB 3.0 > root hub: modem@0, usbsacm1 at > bus address 2 > Apr 29 11:34:36 node02 usba: [ID 349649 > kern.info] Ultimaker BV > (www.ultimaker.com) Ultimaker 2.0 > Apr 29 11:34:36 node02 genunix: [ID > 936769 kern.info] usbsacm1 is > /pci@0,0/pci1043,84ca@14/communications@1/modem@0 > Apr 29 11:34:36 node02 genunix: [ID > 408114 kern.info] > /pci@0,0/pci1043,84ca@14/communications@1/modem@0 (usbsacm1) > online > > But I do not know where that file would > be under /dev. On linux it's > somewhere under /dev/ttyUSB or > /dev/ttyACM. > > I have a device under /dev/term that > links to > ../../devices/pci@0,0/pci1043,84ca@14/communications@1/modem@0:0 like > usbsacm1 should. But that device seems > not to be correct. > > Does anybody know where that device > usbsacm1 would be under /dev? or do > I need anything aditional to get access > to that device? > > Thanks in advance for any advice and > Greetings > Till > > _______________________________________________ > openindiana-discuss mailing list > [email protected] > https://openindiana.org/mailman/listinfo/openindiana-discuss > > > _______________________________________________ > openindiana-discuss mailing list > [email protected] > https://openindiana.org/mailman/listinfo/openindiana-discuss > _______________________________________________ openindiana-discuss mailing list [email protected] https://openindiana.org/mailman/listinfo/openindiana-discuss
