On Sun, Apr 29, 2018 at 12:56 PM, Till Wegmüller <[email protected]> wrote:
> Hello Dear OI Community > > I am trying to connect my Ultimaker to my OpenIndiana Server. It is a > serial device accessed through a python software. > > When connecting the USB I can see it showing up in dmesg: > Apr 29 11:34:36 node02 usba: [ID 349649 kern.info] usba: no > driver found for interface 1 (nodename: 'data') of Ultimaker BV > (www.ultimaker.com) Ultimaker 2.0 > Apr 29 11:34:36 node02 usba: [ID 912658 kern.info] USB 1.10 interface > (usbif2341,10.config1.0) operating at full speed (USB 1.x) on USB 3.0 > root hub: modem@0, usbsacm1 at bus address 2 > Apr 29 11:34:36 node02 usba: [ID 349649 kern.info] Ultimaker BV > (www.ultimaker.com) Ultimaker 2.0 > Apr 29 11:34:36 node02 genunix: [ID 936769 kern.info] usbsacm1 is > /pci@0,0/pci1043,84ca@14/communications@1/modem@0 > Apr 29 11:34:36 node02 genunix: [ID 408114 kern.info] > /pci@0,0/pci1043,84ca@14/communications@1/modem@0 (usbsacm1) online > > But I do not know where that file would be under /dev. On linux it's > somewhere under /dev/ttyUSB or /dev/ttyACM. > > I have a device under /dev/term that links to > ../../devices/pci@0,0/pci1043,84ca@14/communications@1/modem@0:0 like > usbsacm1 should. But that device seems not to be correct. > > Does anybody know where that device usbsacm1 would be under /dev? or do > I need anything aditional to get access to that device? > Is there anything in /dev/cua ? (There should be an equivalent in there to the device in /dev/term.) -- -Peter Tribble http://www.petertribble.co.uk/ - http://ptribble.blogspot.com/ _______________________________________________ openindiana-discuss mailing list [email protected] https://openindiana.org/mailman/listinfo/openindiana-discuss
