Hi Rocky, Thanks for your answer.
Yes, the Jbod is including dual expander, and yes mpathadm list lu confirms two paths. All goes well using the two paths. The only thing is that when you pull one cable , it grinds to a halt while it notices that one path is gone. Do you mean that you have not tested it on oi7 or that you know for sure that it doesn't work on oi7. Did you also pull cables when you tested your system and what os did you use? Thank you again, Regards R > From: [email protected] > To: [email protected] > Date: Wed, 6 Feb 2013 20:20:15 +0000 > Subject: Re: [OpenIndiana-discuss] sas multipath > > Randy, > > 1) By default, 6G HBA(mpt_sas) is already MPxIO enabled. You no longer need > to use stmsboot to set it like with 3G HBA > 2) yes, logicblock will be faster > 3) please make sure your JBOD have dual expander > 4) FYI, we normally use 9205-8e or 9207-8E > 5) the following link is what we do the cable > http://dataonstorage.com/images/PDF/Solutions/NX2260-S2%20Unifiled%20Storage%20System.pdf > 6) you may use "mpathadm list lu" to confirm you have dual path. > > I tested it in the past and working but not on OIa7 > > Rocky > -----Original Message----- > From: Randy S [mailto:[email protected]] > Sent: Wednesday, February 06, 2013 4:03 AM > To: [email protected] > Subject: [OpenIndiana-discuss] sas multipath > > > Hi all, > > I have a test system running with OIa7, very much ram, 2 LSI SAS 9207-4i4e > hba's, 1 sm jbod containing seagate 3Tb sas drives. > > I have enabled the multipathing with stmsboot and set it to use > logical-blocksize, since round-robin symmetric-option isn't functioning. > > During tests I can see that the system sees the two path's with mpathadm and > simple dd tests show that all disks are all accessed at almost maximum speed > with minimum latency according to iostat. > We started to test with 4 sas disks in 2 striped mirrors. > > All good, but shouldn't it be possible to pull one of the sas cables without > any disruption to the storage, forcing it to use only one path? (this way > simulating a broken hba). > When we do this, the whole system grinds to a screeching halt, being almost > unresponsive. > > What am I doing wrong. Maybe somebody can point in in the right direction to > troubleshoot. > > Rgrds, > > Randy > > > > > > > _______________________________________________ > OpenIndiana-discuss mailing list > [email protected] > http://openindiana.org/mailman/listinfo/openindiana-discuss > > _______________________________________________ > OpenIndiana-discuss mailing list > [email protected] > http://openindiana.org/mailman/listinfo/openindiana-discuss _______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
