The firmware utility requires the drive to be the only HDD in the
system, and attached to a SATA port. This is a USB-attached drive (in a
SATA/USB enclosure), and the eighth HDD connected to the system. Since
it's also brand new, I don't know what the firmware would give me that
the last revision--assuming my drive has an older firmware--didn't. But
I cannot start re-jigging every HDD I have to try this.
Rainer
On 9/28/2012 4:58 AM, Jonathan Adams wrote:
have you tried the latest hard-disk firmware?
http://knowledge.seagate.com/articles/en_US/FAQ/223651en
do you know what your IO controller is?
On 28 September 2012 12:43, Rainer Heilke <[email protected]> wrote:
The BIOS doesn't list any sizes, just the model numbers. :-(
R
On 9/28/2012 4:30 AM, Jonathan Adams wrote:
Just out of interest, what size does your BIOS think that the drive is?
--
Mind the Gap
Web: http://www.dragonhearth.com
Blog: http://chaos.dragonhearth.com
_______________________________________________
OpenIndiana-discuss mailing list
[email protected]
http://openindiana.org/mailman/listinfo/openindiana-discuss
