Hi Gary,
I've been using NWAM on a computer with one static and one dynamic IP > interface. Is that close to what you need? This was with Solaris 11 > Express, so it may be different with OI. > I found that I couldn't use the default `Automatic' ncp and loc. I > had to create a new ncp, a new ncu, and a new loc with `nwamcfg'. > Then I enabled the new loc with `nwamadm', replacing the `Automatic' > loc. This enabled ipfilter and replaced /etc/resolv.conf and > /etc/nsswitch.conf . Then I used `nwamcfg' to create the ncu phys > and ncu ip for the static interface. I also had to use it to create > a default route, associated with the dynamic interface. > It is quite a complicated procedure, but it is documented in the > nwamadm and nwamcfg man pages. I managed to figure things out with nwam I now have an interface with multiple static IP addresses. So thanks for all the help so far The only thing I want now is to have nwam configure an aggregated interface with a static ip I could add an interface for aggr1m but when I enabled the ncp, it didn't show up in the list of interfaces Does anyone here know if this is possble and if so, how? Thanks again in advance Kind regards/met vriendelijke groet, Serge Fonville http://www.sergefonville.nl Convince Google!! They need to add GAL support on Android http://code.google.com/p/android/issues/detail?id=4602 2011/6/19 Gary Mills <[email protected]> > On Sun, Jun 19, 2011 at 10:37:13AM +0200, Serge Fonville wrote: > > > > create /etc/nwam/llp like this: > > > e1000g0 static 10.0.0.4/24 > > > > Unfortunately /etc/nwam/llp won't work. > > Due to as desribed in https://www.illumos.org/issues/560 > > > > It says something about nwamcfg, but I have no idea what I need to do > with > > that exactly > > I've been using NWAM on a computer with one static and one dynamic IP > interface. Is that close to what you need? This was with Solaris 11 > Express, so it may be different with OI. > > I found that I couldn't use the default `Automatic' ncp and loc. I > had to create a new ncp, a new ncu, and a new loc with `nwamcfg'. > Then I enabled the new loc with `nwamadm', replacing the `Automatic' > loc. This enabled ipfilter and replaced /etc/resolv.conf and > /etc/nsswitch.conf . Then I used `nwamcfg' to create the ncu phys > and ncu ip for the static interface. I also had to use it to create > a default route, associated with the dynamic interface. > > It is quite a complicated procedure, but it is documented in the > nwamadm and nwamcfg man pages. > > -- > -Gary Mills- -Unix Group- -Computer and Network Services- > _______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
