On 19/06/2011 11:54 a.m., Serge Fonville wrote:
Hi,
I recently installed a oi_148 system.
By default every interface is configured with DHCP and NWAM
I read I can configure NWAM with static IPs and that it would be 'better'
that way somehow.
Unfortunately I can not find any resource what I need to do in what order to
have all four interfaces configured with static IPs.
What do I need to do to set this up?
Thanks in advance
What do I need to do, to set this up
Kind regards/met vriendelijke groet,
Serge Fonville
http://www.sergefonville.nl
Convince Google!!
They need to add GAL support on Android
http://code.google.com/p/android/issues/detail?id=4602
_______________________________________________
from my build script
svcadm disable network/physical:nwam
svcadm enable network/physical:default
#This is a 10Gb nic, so substitute your dev name for ixgbe0
#mtu change is not required.
#10BbE
# MTU to 9000
dladm set-linkprop -p mtu=9000 ixgbe0
#static ip
ipadm create-addr -T static -a local=10.1.18.19/29 ixgbe0/v4
#don't forget a route -
route -p add default 10.1.18.254
#bonding
dladm create-aggr -d igb0 -d igb1 0
dladm create-aggr -d igb2 -d igb3 1
#Note: cannot both be on an existing subnet - if one down, both go down.
ipadm create-addr -T static -a local=10.1.17.10/24 aggr0/v4
ipadm create-addr -T static -a local=10.1.19.10/24 aggr1/v4
_______________________________________________
OpenIndiana-discuss mailing list
[email protected]
http://openindiana.org/mailman/listinfo/openindiana-discuss
