On Fri, May 20, 2011 at 09:02:50AM +0200, Gabriele Bulfon wrote: > Thanx for the pointer. I did all of this already, and I'm not talking about > serving iscsi > over ethernet via the OS, but letting the QLogic card implement the iscsi > through its > ready to run hardware.
The QLE4062C card is a hardware Iscsi initiator. To the host it appears like a normal SCSI HBA with directly-attached disks. All of the Iscsi configuration is done on the card itself, with Qlogic's CLI utility. You can only use it as an initiator, not as a target. > Da: Jonathan Adams > A: Discussion list for OpenIndiana > Data: 19 maggio 2011 21.12.44 CEST > Oggetto: Re: [OpenIndiana-discuss] Sharing zfs volume on QLogic QLE4062C > have you seen: > http://serverfault.com/questions/264560/openindiana-zfs-with-shareiscsi-property-missing > On 19 May 2011 16:50, Gabriele Bulfon > wrote: > Hi, I was trying to follow some guides to share zfs volumse through hardware > manged iscsi. > I have installed an QLE4062C and original QLogic drivers. > The system see the device and ports, QLogic cli commands can see everything > correctly. > I'm trapped now, because "fcinfo hba-port" does not see any adapter. > Docs talk about switching from initiator mode to traget, by updating the > driver from qlc to qlt. > My driver is not qlc, but qla4xxx, or what am I missing? -- -Gary Mills- -Unix Group- -Computer and Network Services- _______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
