Thanx for the pointer. I did all of this already, and I'm not talking about serving iscsi over ethernet via the OS, but letting the QLogic card implement the iscsi through its ready to run hardware. What I miss is how to bind the QLogic hardware iscsi targets to ZFS volumes. If QLogic gives me a specific driver for Solaris, and it works, and I can use its tools to configure iscsi on the OS, I believe there should be a reason for it. I'm missing something, I think.... ---------------------------------------------------------------------------------- Da: Jonathan Adams A: Discussion list for OpenIndiana Data: 19 maggio 2011 21.12.44 CEST Oggetto: Re: [OpenIndiana-discuss] Sharing zfs volume on QLogic QLE4062C have you seen: http://serverfault.com/questions/264560/openindiana-zfs-with-shareiscsi-property-missing On 19 May 2011 16:50, Gabriele Bulfon wrote: Hi, I was trying to follow some guides to share zfs volumse through hardware manged iscsi. I have installed an QLE4062C and original QLogic drivers. The system see the device and ports, QLogic cli commands can see everything correctly. I'm trapped now, because "fcinfo hba-port" does not see any adapter. Docs talk about switching from initiator mode to traget, by updating the driver from qlc to qlt. My driver is not qlc, but qla4xxx, or what am I missing? I tried to do the update_drv changing from qla4xxx to qlt, but it doesn't work and it fails to attach. How can I let OpenIndiana use the card and share zfs volumes on it? Thanks for any help. Gabriele. _______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss _______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
_______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
