I don't have a quick answer for you but I'll be in the office later this week 
and can grab a model with the same protocol and run a test on one of my Ubuntu 
boxes (which should be close enough to your Pi setup).


Thank you,
David Zomaya
Tripp Lite








From: Nut-upsuser 
<nut-upsuser-bounces+david_zomaya=tripplite....@alioth-lists.debian.net> on 
behalf of Adam Talbot via Nut-upsuser <[email protected]>
Sent: Monday, February 1, 2021 3:39 PM
To: [email protected]
Subject: [EXTERNAL] [Nut-upsuser] Tripp Lite "Remote Shutdown" when USB cable 
is attached

This is an EXTERNAL email. Please take a moment and think before clicking any 
links or opening any attachments from this email. If suspicious, please forward 
to [email protected] for review.
I am kinda stuck on this one.  Whenever I attach (USB to a linux box) my 
TrippLite UPS, it "REMOTE SHUTDOWN".  This is a new problem that has cropped up 
in the last 6 months.  At first I thought it was a NUT configuration issue, but 
now I believe this  to be some kind of kernel bug?  When I plug in the UPS, I 
can see the system logs show the UPS, then everything powers off.


UPS LCD shows the below error when I plug in the USB cable:
"OUTPUT OFF"
"REMOTE SHUTDOWN"


I tested this against 2 different X86 boxes and a Raspberry Pi. All cause the 
same result in the UPS.  Only one box (nas) has NUT installed and configured.


UPS is a Tripp Lite SU3000RTXLCD2U.


I am totally stumped on this one.  Below is a dump of basically all my specs.  
Any ideas?
-Adam



root@nas:~# uname -a
Linux nas 5.4.78-2-pve #1 SMP PVE 5.4.78-2 (Thu, 03 Dec 2020 14:26:17 +0100) 
x86_64 GNU/Linux

root@nas:~# cat /etc/nut/nut.conf
MODE=netserver
root@nas:~# cat /etc/nut/ups.conf
[ups1]
driver=usbhid-ups
port=auto
root@nas:~# cat /etc/nut/upsd.conf
LISTEN 127.0.0.1 3493
LISTEN 10.1.1.2
root@nas:~# cat /etc/nut/upsmon.conf
root@nas:~# cat /etc/nut/upssched.conf
root@nas:~#

root@nas:~# cat /etc/debian_version
10.7



Before all this broke, I was able to monitor the UPS and get the following info:
battery.charge: 100
battery.charge.low: 20
battery.charge.warning: 20
battery.runtime: 6662
battery.temperature: 29.9
battery.type: PbAc
battery.voltage: 81.0
battery.voltage.nominal: 72.0
device.mfr: TRIPPLITE
device.model: TRIPPLITE UPS
device.serial: XXXXXXXXXXXXXX
device.type: ups
driver.name:  usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.data: TrippLite HID 0.82
driver.version.internal: 0.41
input.frequency: 60.0
input.transfer.high: 150.0
input.transfer.high.max: 150
input.transfer.high.min: 145
input.transfer.low: 55.0
input.transfer.low.max: 60
input.transfer.low.min: 55
input.voltage: 123.0
input.voltage.nominal: 120
output.current: 1.9
output.frequency: 60.0
output.frequency.nominal: 60
output.voltage: 120.0
output.voltage.nominal: 120
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.firmware: 64
ups.load: 8
ups.mfr: TRIPPLITE
ups.model: TRIPPLITE UPS
ups.power: 226.0
ups.power.nominal: 3000
ups.productid: 4004
ups.serial: 2620ELCPS87A200020
ups.status: OL
ups.test.result: Done and passed
ups.timer.reboot: 0
ups.timer.shutdown: -1
ups.timer.start: 0
ups.vendorid: 09ae
ups.watchdog.status: 0


root@nas:/var/log# zcat messages.*.gz | grep -i tripp
Jan 15 11:05:05 nas kernel: [    1.571857] usb 3-1: Product: TRIPPLITE UPS
Jan 15 11:05:05 nas kernel: [    1.571858] usb 3-1: Manufacturer: TRIPPLITE
Jan 15 11:05:05 nas kernel: [    1.629210] hid-generic 0003:09AE:4004.0001: 
hiddev0,hidraw0: USB HID v1.11 Device [TRIPPLITE        TRIPPLITE UPS   ] on 
usb-0000:2e:00.3-1/input0



________________________________
 This message is for the addressee's use only. It may contain confidential 
information. If you receive this message in error, please delete it and notify 
the sender. Tripp Lite disclaims all warranties and liabilities, and assumes no 
responsibility for viruses which may infect an email sent to you from Tripp 
Lite and which damage your electronic systems or information. It is your 
responsibility to maintain virus detection systems to prevent damage to your 
electronic systems and information.

_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser

Reply via email to