Hi,
> From: Lothar Waßmann <l...@karo-electronics.de> Sent: Monday, November 30,
> 2015 7:33 PM
> > To: Andrew Lunn; David S. Miller; Estevam Fabio-R49496; Greg Ungerer;
> > Kevin Hao; Lothar Waßmann; Lucas Stach; Duan Fugang-B38611; Philippe
> > Reynes; Richard Cochran; Russell King; Sascha Hauer; Stefan Agner; linux-
> > ker...@vger.kernel.org; netdev@vger.kernel.org; Jeff Kirsher; Uwe Kleine-
> > König
> > Subject: [PATCH 2/3] net: fec: convert to using gpiod framework
> >
> > Use gpiod_get_optional() instead of checking for a valid GPIO number and
> > calling devm_gpio_request_one() conditionally.
> >
> > Signed-off-by: Lothar Waßmann <l...@karo-electronics.de>
> > ---
> > drivers/net/ethernet/freescale/fec_main.c | 17 +++++++----------
> > 1 file changed, 7 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/freescale/fec_main.c
> > b/drivers/net/ethernet/freescale/fec_main.c
> > index e17d74f..1a983fc 100644
> > --- a/drivers/net/ethernet/freescale/fec_main.c
> > +++ b/drivers/net/ethernet/freescale/fec_main.c
> > @@ -3233,7 +3233,7 @@ static int fec_enet_init(struct net_device *ndev)
> > #ifdef CONFIG_OF static void fec_reset_phy(struct platform_device *pdev)
> > {
> > - int err, phy_reset;
> > + struct gpio_desc *phy_reset;
> > int msec = 1;
> > struct device_node *np = pdev->dev.of_node;
> >
> > @@ -3245,18 +3245,15 @@ static void fec_reset_phy(struct platform_device
> > *pdev)
> > if (msec > 1000)
> > msec = 1;
> >
> > - phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
> > - if (!gpio_is_valid(phy_reset))
> > - return;
> > -
> > - err = devm_gpio_request_one(&pdev->dev, phy_reset,
> > - GPIOF_OUT_INIT_LOW, "phy-reset");
> > - if (err) {
> > - dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n",
> > err);
> > + phy_reset = devm_gpiod_get_optional(&pdev->dev, "phy-reset",
> > + GPIOD_OUT_LOW);
> > + if (IS_ERR(phy_reset)) {
> > + dev_err(&pdev->dev, "failed to get phy-reset-gpios: %ld\n",
> > + PTR_ERR(phy_reset));
> > return;
> > }
> > msleep(msec);
> > - gpio_set_value_cansleep(phy_reset, 1);
> > + gpiod_set_value_cansleep(phy_reset, 1);
>
> This API will judge the GPIO active polarity, there many imx boards in dts
> files don't care the polarity.
> So pls drop the patch.
>
> Or use gpiod_set_raw_value_cansleep() instead of gpiod_set_value_cansleep().
>
I could prepare a patch that temporarily uses the raw functions and add
a comment to convert these to the proper functions once all DTB files
have been corrected and some time has passed to account for boards using
old dtbs with newer kernels.
I could also send a patch to convert all in-tree dts files to use
GPIO_ACTIVE_LOW if that is desired.
Lothar Waßmann
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
