On Wed, Nov 07, 2007 at 04:32:00PM -0800, David Miller wrote:
> From: "John W. Linville" <[EMAIL PROTECTED]>
> Date: Wed, 7 Nov 2007 13:51:54 -0500
>
> > Hold-off on this one for now if -- clearly Johannes and I need to
> > brush-up on our Kconfig skills... :-(
> >
> > I'll post a new pull request soon.
>
> Ok.
Dave,
These fixes are additive on top of the previous request archived here:
http://marc.info/?l=linux-wireless&m=119439453721827&w=2
I've been sending ssb patches to you, but I'm not sure if that is the
right place to send them. If you don't want them, can you suggest where
else I should send them?
Anyway, let me know if there are any problems!
Thanks,
John
---
The entire series (i.e. both from yesterday and today) is available
here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-2.6/fixes-davem
---
The following changes since commit d81bd04a737c102481c0ee7b46443796e14b6b5c:
John W. Linville (1):
mac80211: make "decrypt failed" messages conditional upon MAC80211_DEBUG
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
fixes-davem
Johannes Berg (1):
mac80211: fix MAC80211_RCSIMPLE Kconfig
Michael Buesch (1):
ssb: Fix PCMCIA-host lowlevel bus access
drivers/ssb/main.c | 1 +
drivers/ssb/pcmcia.c | 56 +++++++++++++++++++++++++-------------------------
net/mac80211/Kconfig | 4 +-
3 files changed, 31 insertions(+), 30 deletions(-)
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index fc1d589..85a2054 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -440,6 +440,7 @@ static int ssb_devices_register(struct ssb_bus *bus)
break;
case SSB_BUSTYPE_PCMCIA:
#ifdef CONFIG_SSB_PCMCIAHOST
+ sdev->irq = bus->host_pcmcia->irq.AssignedIRQ;
dev->parent = &bus->host_pcmcia->dev;
#endif
break;
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index b6abee8..bb44a76 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -63,17 +63,17 @@ int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus,
err = pcmcia_access_configuration_register(pdev, ®);
if (err != CS_SUCCESS)
goto error;
- read_addr |= (reg.Value & 0xF) << 12;
+ read_addr |= ((u32)(reg.Value & 0x0F)) << 12;
reg.Offset = 0x30;
err = pcmcia_access_configuration_register(pdev, ®);
if (err != CS_SUCCESS)
goto error;
- read_addr |= reg.Value << 16;
+ read_addr |= ((u32)reg.Value) << 16;
reg.Offset = 0x32;
err = pcmcia_access_configuration_register(pdev, ®);
if (err != CS_SUCCESS)
goto error;
- read_addr |= reg.Value << 24;
+ read_addr |= ((u32)reg.Value) << 24;
cur_core = (read_addr - SSB_ENUM_BASE) / SSB_CORE_SIZE;
if (cur_core == coreidx)
@@ -152,28 +152,29 @@ error:
goto out_unlock;
}
-/* These are the main device register access functions.
- * do_select_core is inline to have the likely hotpath inline.
- * All unlikely codepaths are out-of-line. */
-static inline int do_select_core(struct ssb_bus *bus,
- struct ssb_device *dev,
- u16 *offset)
+static int select_core_and_segment(struct ssb_device *dev,
+ u16 *offset)
{
+ struct ssb_bus *bus = dev->bus;
int err;
- u8 need_seg = (*offset >= 0x800) ? 1 : 0;
+ u8 need_segment;
+
+ if (*offset >= 0x800) {
+ *offset -= 0x800;
+ need_segment = 1;
+ } else
+ need_segment = 0;
if (unlikely(dev != bus->mapped_device)) {
err = ssb_pcmcia_switch_core(bus, dev);
if (unlikely(err))
return err;
}
- if (unlikely(need_seg != bus->mapped_pcmcia_seg)) {
- err = ssb_pcmcia_switch_segment(bus, need_seg);
+ if (unlikely(need_segment != bus->mapped_pcmcia_seg)) {
+ err = ssb_pcmcia_switch_segment(bus, need_segment);
if (unlikely(err))
return err;
}
- if (need_seg == 1)
- *offset -= 0x800;
return 0;
}
@@ -181,32 +182,31 @@ static inline int do_select_core(struct ssb_bus *bus,
static u16 ssb_pcmcia_read16(struct ssb_device *dev, u16 offset)
{
struct ssb_bus *bus = dev->bus;
- u16 x;
- if (unlikely(do_select_core(bus, dev, &offset)))
+ if (unlikely(select_core_and_segment(dev, &offset)))
return 0xFFFF;
- x = readw(bus->mmio + offset);
- return x;
+ return readw(bus->mmio + offset);
}
static u32 ssb_pcmcia_read32(struct ssb_device *dev, u16 offset)
{
struct ssb_bus *bus = dev->bus;
- u32 x;
+ u32 lo, hi;
- if (unlikely(do_select_core(bus, dev, &offset)))
+ if (unlikely(select_core_and_segment(dev, &offset)))
return 0xFFFFFFFF;
- x = readl(bus->mmio + offset);
+ lo = readw(bus->mmio + offset);
+ hi = readw(bus->mmio + offset + 2);
- return x;
+ return (lo | (hi << 16));
}
static void ssb_pcmcia_write16(struct ssb_device *dev, u16 offset, u16 value)
{
struct ssb_bus *bus = dev->bus;
- if (unlikely(do_select_core(bus, dev, &offset)))
+ if (unlikely(select_core_and_segment(dev, &offset)))
return;
writew(value, bus->mmio + offset);
}
@@ -215,12 +215,12 @@ static void ssb_pcmcia_write32(struct ssb_device *dev,
u16 offset, u32 value)
{
struct ssb_bus *bus = dev->bus;
- if (unlikely(do_select_core(bus, dev, &offset)))
+ if (unlikely(select_core_and_segment(dev, &offset)))
return;
- readw(bus->mmio + offset);
- writew(value >> 16, bus->mmio + offset + 2);
- readw(bus->mmio + offset);
- writew(value, bus->mmio + offset);
+ writeb((value & 0xFF000000) >> 24, bus->mmio + offset + 3);
+ writeb((value & 0x00FF0000) >> 16, bus->mmio + offset + 2);
+ writeb((value & 0x0000FF00) >> 8, bus->mmio + offset + 1);
+ writeb((value & 0x000000FF) >> 0, bus->mmio + offset + 0);
}
/* Not "static", as it's used in main.c */
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index 32c8c08..ce176e6 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -14,9 +14,9 @@ config MAC80211
networking stack.
config MAC80211_RCSIMPLE
- bool "'simple' rate control algorithm"
+ bool "'simple' rate control algorithm" if EMBEDDED
default y
- depends on MAC80211 && EMBEDDED
+ depends on MAC80211
help
This option allows you to turn off the 'simple' rate
control algorithm in mac80211. If you do turn it off,
--
John W. Linville
[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
