From: TAKANO Ryousei <[EMAIL PROTECTED]>
Date: Thu, 11 Oct 2007 22:51:46 +0900 (JST)
> Modules linked in: 8021q tcp_bic netconsole evdev joydev sg st sr_mod
> ohci_hcd i2c_amd756 i2c_amd8111 i2c_core ipv6 tg3 usbhid usbcore ff_memless
> dm_mod ext3 jbd sata_sil libata sd_mod scsi_mod
...
> RIP points at __list_del (net_rx_action -> list_move_tail -> __list_del).
There is a contract between the driver's ->poll() method and
net_rx_action() in that it is assumed that if the entire quota has
been used up, the driver will not perform a netif_rx_complete().
It seems that in a corner case the tg3 driver, which you appear to be
using, will not abide by this rule. That corner case is when the card
has exactly "budget" receive packets pending. In such a case
tg3_has_work() will be false, and we will RX complete when work_done
>= budget, which violates the above mentioned rule.
Can you see if the following test patch makes the crash go away?
Michael, I know you're not pleased with this patch and neither am
I. It might be better to just strictly RX complete when
(work < budget) and if tg3_has_work(), trigger a HW interrupt.
Alternatively we could loop in tg3_poll() until either budget
is exhausted or tg3_has_work() returns false. Actually, this sounds
like a cleaner scheme the more I think about it.
BNX2 likely has a similar issue.
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index d2b30fb..8c27962 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -3599,7 +3599,7 @@ static int tg3_poll(struct napi_struct *napi, int budget)
sblk->status &= ~SD_STATUS_UPDATED;
/* if no more work, tell net stack and NIC we're done */
- if (!tg3_has_work(tp)) {
+ if ((work_done < budget) && !tg3_has_work(tp)) {
netif_rx_complete(netdev, napi);
tg3_restart_ints(tp);
}
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
