On Wed, Jan 20, 2021 at 04:05:02AM +0100, Marek Vasut wrote:
> KSZ8794CNX datasheet section 8.0 RESET CIRCUIT describes recommended
> circuit for interfacing with CPU/FPGA reset consisting of 10k pullup
> resistor and 10uF capacitor to ground. This circuit takes ~100 ms to
> rise enough to release the reset.
>
> For maximum supply voltage VDDIO=3.3V VIH=2.0V R=10kR C=10uF that is
> VDDIO - VIH
> t = R * C * -ln( ------------- ) = 10000*0.00001*-(-0.93)=0.093 s
> VDDIO
> so we need ~95 ms for the reset to really de-assert, and then the
> original 100us for the switch itself to come out of reset. Simply
> msleep() for 100 ms which fits the constraint with a bit of extra
> space.
>
> Fixes: 5b797980908a ("net: dsa: microchip: Implement recommended reset
> timing")
> Reviewed-by: Florian Fainelli <[email protected]>
> Signed-off-by: Marek Vasut <[email protected]>
> Cc: Andrew Lunn <[email protected]>
> Cc: Florian Fainelli <[email protected]>
> Cc: Jakub Kicinski <[email protected]>
> Cc: Michael Grzeschik <[email protected]>
> Cc: Paul Barker <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
