On Tue, Jan 12, 2021 at 08:54:04PM +0100, Marek Behún wrote:
> From: Pavana Sharma <pavana.sha...@digi.com>
>
> The Marvell 88E6393X device is a single-chip integration of a 11-port
> Ethernet switch with eight integrated Gigabit Ethernet (GbE)
> transceivers and three 10-Gigabit interfaces.
>
> This patch adds functionalities specific to mv88e6393x family (88E6393X,
> 88E6193X and 88E6191X).
>
> The main differences between previous devices and this one are:
> - port 0 can be a SERDES port
> - all SERDESes are one-lane, eg. no XAUI nor RXAUI
> - on the other hand the SERDESes can do USXGMII, 10GBASER and 5GBASER
> (on 6191X only one SERDES is capable of more than 1g; USXGMII is not
> yet supported with this change)
> - Port Policy CTL register is changed to Port Policy MGMT CTL register,
> via which several more registers can be accessed indirectly
> - egress monitor port is configured differently
> - ingress monitor/CPU/mirror ports are configured differently and can be
> configured per port (ie. each port can have different ingress monitor
> port, for example)
> - port speed AltBit works differently than previously
> - PHY registers can be also accessed via MDIO address 0x18 and 0x19
> (on previous devices they could be accessed only via Global 2 offsets
> 0x18 and 0x19, which means two indirections; this feature is not yet
> leveraged with this patch)
>
> Co-developed-by: Ashkan Boldaji <ashkan.bold...@digi.com>
> Signed-off-by: Ashkan Boldaji <ashkan.bold...@digi.com>
> Signed-off-by: Pavana Sharma <pavana.sha...@digi.com>
> Co-developed-by: Marek Behún <ka...@kernel.org>
> Signed-off-by: Marek Behún <ka...@kernel.org>
> ---
> drivers/net/dsa/mv88e6xxx/chip.c | 149 +++++++++++++
> drivers/net/dsa/mv88e6xxx/chip.h | 4 +
> drivers/net/dsa/mv88e6xxx/global1.h | 2 +
> drivers/net/dsa/mv88e6xxx/global2.h | 8 +
> drivers/net/dsa/mv88e6xxx/port.c | 267 ++++++++++++++++++++++++
> drivers/net/dsa/mv88e6xxx/port.h | 47 ++++-
> drivers/net/dsa/mv88e6xxx/serdes.c | 312 ++++++++++++++++++++++++++++
> drivers/net/dsa/mv88e6xxx/serdes.h | 44 ++++
> 8 files changed, 831 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/dsa/mv88e6xxx/chip.c
> b/drivers/net/dsa/mv88e6xxx/chip.c
> index ed07cb29b285..c2dc6858481a 100644
> --- a/drivers/net/dsa/mv88e6xxx/chip.c
> +++ b/drivers/net/dsa/mv88e6xxx/chip.c
> @@ -635,6 +635,28 @@ static void mv88e6390x_phylink_validate(struct
> mv88e6xxx_chip *chip, int port,
> mv88e6390_phylink_validate(chip, port, mask, state);
> }
>
> +static void mv88e6393x_phylink_validate(struct mv88e6xxx_chip *chip, int
> port,
> + unsigned long *mask,
> + struct phylink_link_state *state)
> +{
> + if (port == 0 || port == 9 || port == 10) {
> + phylink_set(mask, 10000baseT_Full);
> + phylink_set(mask, 10000baseCR_Full);
> + phylink_set(mask, 10000baseSR_Full);
> + phylink_set(mask, 10000baseLR_Full);
> + phylink_set(mask, 10000baseLRM_Full);
> + phylink_set(mask, 10000baseER_Full);
Why did you remove 1000baseKR_Full from here?
