From: Aya Levin <a...@nvidia.com>
Expose firmware indication that it supports setting eswitch uplink state
to follow (follow the physical link). Condition setting the eswitch
uplink admin-state with this capability bit. Older FW may not support
the uplink state setting.
Fixes: 7d0314b11cdd ("net/mlx5e: Modify uplink state on interface up/down")
Signed-off-by: Aya Levin <a...@nvidia.com>
Reviewed-by: Moshe Shemesh <mo...@nvidia.com>
Signed-off-by: Saeed Mahameed <sae...@nvidia.com>
---
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 3 ++-
include/linux/mlx5/mlx5_ifc.h | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 7a79d330c075..6a852b4901aa 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -3161,7 +3161,8 @@ static void mlx5e_modify_admin_state(struct mlx5_core_dev
*mdev,
mlx5_set_port_admin_status(mdev, state);
- if (mlx5_eswitch_mode(mdev) != MLX5_ESWITCH_LEGACY)
+ if (mlx5_eswitch_mode(mdev) == MLX5_ESWITCH_OFFLOADS ||
+ !MLX5_CAP_GEN(mdev, uplink_follow))
return;
if (state == MLX5_PORT_UP)
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 8fbddec26eb8..442c0160caab 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -1280,7 +1280,8 @@ struct mlx5_ifc_cmd_hca_cap_bits {
u8 ece_support[0x1];
u8 reserved_at_a4[0x7];
u8 log_max_srq[0x5];
- u8 reserved_at_b0[0x2];
+ u8 reserved_at_b0[0x1];
+ u8 uplink_follow[0x1];
u8 ts_cqe_to_dest_cqn[0x1];
u8 reserved_at_b3[0xd];
--
2.26.2
