On Fri, Oct 16, 2020 at 9:21 PM Jakub Kicinski <k...@kernel.org> wrote: > > On Fri, 16 Oct 2020 11:35:15 +0200 Ian Kumlien wrote: > > Adding netdev, someone might have a clue of what to look at... > > > > On Mon, Oct 12, 2020 at 9:20 PM Ian Kumlien <ian.kuml...@gmail.com> wrote: > > > > > > Hi, > > > > > > I was really surprised when i rebooted my firewall and there was > > > network issues, I was even more surprised when > > > only one of the four ports of my ixbe (x553) nic was available when > > > booted. > > Just to be sure you mean that the 3 devices are not present in ip link > show?
or ifconfig or /proc etc etc, so yes > > > You can actually see it dmesg... And i tried some basic looking at > > > changes to see if it was obvious.... but.. > > Showing a full dmesg may be helpful, but looking at what you posted it > seems like the driver gets past the point where netdev gets registered, > so the only thing that could fail after that point AFIACT is > mdiobus_register(). Could be some breakage in MDIO. Humm... interesting, will have a look at it > Any chance you could fire up perf, bpftrace and install a kretprobe to > see what mdiobus_register() returns? You can rebind the device to the > driver through sysfs. Do you need a difference between the kernels?
