Adding netdev, someone might have a clue of what to look at...
On Mon, Oct 12, 2020 at 9:20 PM Ian Kumlien <ian.kuml...@gmail.com> wrote: > > Hi, > > I was really surprised when i rebooted my firewall and there was > network issues, I was even more surprised when > only one of the four ports of my ixbe (x553) nic was available when booted. > > You can actually see it dmesg... And i tried some basic looking at > changes to see if it was obvious.... but.. > > anyway, on v5.8.14: > dmesg |grep ixgbe > [ 1.355454] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - > version 5.1.0-k > [ 1.355455] ixgbe: Copyright (c) 1999-2016 Intel Corporation. > [ 1.711629] ixgbe 0000:06:00.0: Multiqueue Enabled: Rx Queue count > = 12, Tx Queue count = 12 XDP Queue count = 0 > [ 1.838170] ixgbe 0000:06:00.0: MAC: 6, PHY: 27, PBA No: 030000-000 > [ 1.838173] ixgbe 0000:06:00.0: 0c:c4:7a:fa:3d:4a > [ 1.882060] ixgbe 0000:06:00.0: Intel(R) 10 Gigabit Network Connection > [ 1.882196] libphy: ixgbe-mdio: probed > [ 2.234835] ixgbe 0000:06:00.1: Multiqueue Enabled: Rx Queue count > = 12, Tx Queue count = 12 XDP Queue count = 0 > [ 2.361374] ixgbe 0000:06:00.1: MAC: 6, PHY: 27, PBA No: 030000-000 > [ 2.361377] ixgbe 0000:06:00.1: 0c:c4:7a:fa:3d:4b > [ 2.405281] ixgbe 0000:06:00.1: Intel(R) 10 Gigabit Network Connection > [ 2.757541] ixgbe 0000:07:00.0: Multiqueue Enabled: Rx Queue count > = 12, Tx Queue count = 12 XDP Queue count = 0 > [ 2.884104] ixgbe 0000:07:00.0: MAC: 6, PHY: 27, PBA No: 030000-000 > [ 2.884107] ixgbe 0000:07:00.0: 0c:c4:7a:fa:3d:4c > [ 2.928022] ixgbe 0000:07:00.0: Intel(R) 10 Gigabit Network Connection > [ 3.280728] ixgbe 0000:07:00.1: Multiqueue Enabled: Rx Queue count > = 12, Tx Queue count = 12 XDP Queue count = 0 > [ 3.407274] ixgbe 0000:07:00.1: MAC: 6, PHY: 27, PBA No: 030000-000 > [ 3.407276] ixgbe 0000:07:00.1: 0c:c4:7a:fa:3d:4d > [ 3.451155] ixgbe 0000:07:00.1: Intel(R) 10 Gigabit Network Connection > [ 4.648725] ixgbe 0000:07:00.0 eno3: renamed from eth2 > [ 4.659827] ixgbe 0000:06:00.0 eno1: renamed from eth0 > [ 4.674272] ixgbe 0000:07:00.1 eno4: renamed from eth3 > [ 4.685838] ixgbe 0000:06:00.1 eno2: renamed from eth1 > [ 6.070294] ixgbe 0000:06:00.0: registered PHC device on eno1 > [ 7.178307] ixgbe 0000:07:00.0: registered PHC device on eno3 > [ 7.421199] ixgbe 0000:07:00.1: registered PHC device on eno4 > [ 7.662712] ixgbe 0000:06:00.1: registered PHC device on eno2 > [ 9.587640] ixgbe 0000:06:00.0 eno1: NIC Link is Up 1 Gbps, Flow > Control: RX/TX > [ 10.605594] ixgbe 0000:07:00.1 eno4: NIC Link is Up 1 Gbps, Flow > Control: RX/TX > [ 10.754615] ixgbe 0000:07:00.0 eno3: NIC Link is Up 1 Gbps, Flow > Control: RX/TX > [ 10.768586] ixgbe 0000:06:00.1 eno2: NIC Link is Up 1 Gbps, Flow > Control: RX/TX > > on 5.9: > dmesg |grep ixbge > [ 1.570400] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver > [ 1.570401] ixgbe: Copyright (c) 1999-2016 Intel Corporation. > [ 1.928030] ixgbe 0000:06:00.0: Multiqueue Enabled: Rx Queue count > = 12, Tx Queue count = 12 XDP Queue count = 0 > [ 2.054554] ixgbe 0000:06:00.0: MAC: 6, PHY: 27, PBA No: 030000-000 > [ 2.054556] ixgbe 0000:06:00.0: 0c:c4:7a:fa:3d:4a > [ 2.098404] ixgbe 0000:06:00.0: Intel(R) 10 Gigabit Network Connection > [ 2.098541] libphy: ixgbe-mdio: probed > [ 2.453350] ixgbe 0000:06:00.1: Multiqueue Enabled: Rx Queue count > = 12, Tx Queue count = 12 XDP Queue count = 0 > [ 2.579938] ixgbe 0000:06:00.1: MAC: 6, PHY: 27, PBA No: 030000-000 > [ 2.579941] ixgbe 0000:06:00.1: 0c:c4:7a:fa:3d:4b > [ 2.623783] ixgbe 0000:06:00.1: Intel(R) 10 Gigabit Network Connection > [ 2.987339] ixgbe 0000:07:00.0: Multiqueue Enabled: Rx Queue count > = 12, Tx Queue count = 12 XDP Queue count = 0 > [ 3.113864] ixgbe 0000:07:00.0: MAC: 6, PHY: 27, PBA No: 030000-000 > [ 3.113867] ixgbe 0000:07:00.0: 0c:c4:7a:fa:3d:4c > [ 3.157635] ixgbe 0000:07:00.0: Intel(R) 10 Gigabit Network Connection > [ 3.529503] ixgbe 0000:07:00.1: Multiqueue Enabled: Rx Queue count > = 12, Tx Queue count = 12 XDP Queue count = 0 > [ 3.656041] ixgbe 0000:07:00.1: MAC: 6, PHY: 27, PBA No: 030000-000 > [ 3.656043] ixgbe 0000:07:00.1: 0c:c4:7a:fa:3d:4d > [ 3.699856] ixgbe 0000:07:00.1: Intel(R) 10 Gigabit Network Connection > [ 4.646247] ixgbe 0000:06:00.0 eno1: renamed from eth0 > [ 6.183074] ixgbe 0000:06:00.0: registered PHC device on eno1 > [ 9.570382] ixgbe 0000:06:00.0 eno1: NIC Link is Up 1 Gbps, Flow > Control: RX/TX > > lspci.... > 06:00.0 Ethernet controller: Intel Corporation Ethernet Connection > X553 1GbE (rev 11) > 06:00.1 Ethernet controller: Intel Corporation Ethernet Connection > X553 1GbE (rev 11) > 07:00.0 Ethernet controller: Intel Corporation Ethernet Connection > X553 1GbE (rev 11) > 07:00.1 Ethernet controller: Intel Corporation Ethernet Connection > X553 1GbE (rev 11) > > ethtool -i eno1 and eno2 > driver: ixgbe > version: 5.1.0-k > firmware-version: 0x80000877 > expansion-rom-version: > bus-info: 0000:06:00.0 (and 0000:06:00.1) > supports-statistics: yes > supports-test: yes > supports-eeprom-access: yes > supports-register-dump: yes > > while eno3 and eno4 gives: > driver: ixgbe > version: 5.1.0-k > firmware-version: 0x8000087c > expansion-rom-version: > bus-info: 0000:07:00.0 (and 0000:07:00.1) > supports-statistics: yes > supports-test: yes > supports-eeprom-access: yes > supports-register-dump: yes > supports-priv-flags: yes > > Any ideas?
