[PATCH v2 2/4 net-next] net: mdiobus: use flexible sleeping for reset-delay-us

[Bruno Thomsen]

MDIO bus reset pulse width is created by using udelay()
and that function might not be optimal depending on
device tree value. By switching to the new fsleep() helper
the correct delay function is called depending on
delay length, e.g. udelay(), usleep_range() or msleep().

Signed-off-by: Bruno Thomsen <bruno.thom...@gmail.com>
---
 drivers/net/phy/mdio_bus.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 46b33701ad4b..5df3782b05b4 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -554,7 +554,7 @@ int __mdiobus_register(struct mii_bus *bus, struct module 
*owner)
                bus->reset_gpiod = gpiod;
 
                gpiod_set_value_cansleep(gpiod, 1);
-               udelay(bus->reset_delay_us);
+               fsleep(bus->reset_delay_us);
                gpiod_set_value_cansleep(gpiod, 0);
        }
 
-- 
2.26.2