Load new "reset-post-delay-us" value from MDIO properties,
and if configured to a greater then zero delay do a
flexible sleeping delay after MDIO bus reset deassert.
This allows devices to exit reset state before start
bus communication.
Signed-off-by: Bruno Thomsen <bruno.thom...@gmail.com>
---
drivers/net/phy/mdio_bus.c | 2 ++
drivers/of/of_mdio.c | 2 ++
include/linux/phy.h | 2 ++
3 files changed, 6 insertions(+)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 5df3782b05b4..0af20faad69d 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -556,6 +556,8 @@ int __mdiobus_register(struct mii_bus *bus, struct module
*owner)
gpiod_set_value_cansleep(gpiod, 1);
fsleep(bus->reset_delay_us);
gpiod_set_value_cansleep(gpiod, 0);
+ if (bus->reset_post_delay_us > 0)
+ fsleep(bus->reset_post_delay_us);
}
if (bus->reset) {
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index eb84507de28a..cb32d7ef4938 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -268,6 +268,8 @@ int of_mdiobus_register(struct mii_bus *mdio, struct
device_node *np)
/* Get bus level PHY reset GPIO details */
mdio->reset_delay_us = DEFAULT_GPIO_RESET_DELAY;
of_property_read_u32(np, "reset-delay-us", &mdio->reset_delay_us);
+ mdio->reset_post_delay_us = 0;
+ of_property_read_u32(np, "reset-post-delay-us",
&mdio->reset_post_delay_us);
/* Register the MDIO bus */
rc = mdiobus_register(mdio);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 0403eb799913..3a09d2bf69ea 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -293,6 +293,8 @@ struct mii_bus {
/* GPIO reset pulse width in microseconds */
int reset_delay_us;
+ /* GPIO reset deassert delay in microseconds */
+ int reset_post_delay_us;
/* RESET GPIO descriptor pointer */
struct gpio_desc *reset_gpiod;
--
2.26.2
