Hello,
On Tue, 17 Sep 2019, David Ahern wrote:
> On 9/17/19 12:50 PM, Julian Anastasov wrote:
> >
> > Looks good to me, thanks!
> >
> > Reviewed-by: Julian Anastasov <j...@ssi.bg>
> >
>
> BTW, do you have any tests for the rt_uses_gateway paths - showing why
> it is needed?
No special tests.
> All of the pmtu, redirect, fib tests, etc worked fine without the
> special flag. Sure, the 'ip ro get' had extra data; it seems like that
> could be handled.
I'll explain. In the period before the route cache
was removed in 3.6, there were two fields: rt_dst and rt_gateway.
For targets on LAN both contained the target. For targets via
gateway (nh_gw), rt_dst still stores the target but rt_gateway
stored the nh_gw. In short, rt_gateway always contained the
next hop IP for neigh resolving.
In 3.6, rt_dst was removed and only rt_gateway remained
to store nh_gw. As fnhe_rth/nh_pcpu_rth_output were used to
cache the output route, rt_gateway can not contain any IP
because the route can be used for any target on the LAN.
This is true even now, rt_gateway is 0 for cached routes
that are not DST_HOST, i.e. not for single target IP.
Why this matters? There are users such as IPVS,
TEE, raw.c (IP_HDRINCL) that use FLOWI_FLAG_KNOWN_NH to
request route with rt_gateway != 0 to be returned, i.e.
they want rt_gateway to store a next hop IP for neigh
resolving but to put different IP in iph->daddr. This is
honoured by rt_nexthop(), it prefers rt_gateway before the
iph->daddr. With this FLOWI flag the routing will avoid
returning routes with rt_gateway = 0 (cached in NH), instead
it will allocate DST_HOST route which can safely hold IP
in rt_gateway.
So, in 3.7 commit 155e8336c373 ("ipv4: introduce
rt_uses_gateway") was created to restore the knowledge
that rt_dst != rt_gateway means route via GW and also
commit c92b96553a80 ("ipv4: Add FLOWI_FLAG_KNOWN_NH")
to make sure packets are routed by requested next hop and
not by iph->daddr.
You see the places that need to know if rt_gateway
contains nh_gw (via GW) or just a requested next hop (when
nh_gw is 0). It matters for cases where strict source routes
should be on connected network.
In simple tests things are working without rt_uses_gateway
flag because it is a corner case to see above cases combined
with strict source routing or MTU locking. Not sure if we can
use some trick to support it differently without such flag.
Regards
--
Julian Anastasov <j...@ssi.bg>
