This is a series of enhancements and bug fixes in order to get the mainline version of this driver into a more generally usable state, including on x86 or ARM platforms. It also converts the driver to use the phylink API in order to provide support for SFP modules.
Changes since v1: -Split up some patches -Removed IO accessor ifdefs Robert Hancock (18): net: axienet: Fix casting of pointers to u32 net: axienet: Use standard IO accessors net: axienet: fix MDIO bus naming net: axienet: add X86 and ARM as supported platforms net: axienet: Allow explicitly setting MDIO clock divisor net: axienet: fix teardown order of MDIO bus net: axienet: Re-initialize MDIO registers properly after reset net: axienet: Cleanup DMA device reset and halt process net: axienet: Make RX/TX ring sizes configurable net: axienet: Add DMA registers to ethtool register dump net: axienet: Support shared interrupts net: axienet: Add optional support for Ethernet core interrupt net: axienet: Fix race condition causing TX hang net: axienet: Make missing MAC address non-fatal net: axienet: stop interface during shutdown net: axienet: document axistream-connected attribute net: axienet: make use of axistream-connected attribute optional net: axienet: convert to phylink API .../devicetree/bindings/net/xilinx_axienet.txt | 24 +- drivers/net/ethernet/xilinx/Kconfig | 6 +- drivers/net/ethernet/xilinx/xilinx_axienet.h | 35 +- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 652 ++++++++++++++------- drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 173 +++--- 5 files changed, 592 insertions(+), 298 deletions(-) -- 1.8.3.1
