[PATCH v2 3/3] qlogic: qlcnic: fix use of SPEED_UNKNOWN ethtool constant

[Michael Zhivich]

qlcnic driver uses u16 to store SPEED_UKNOWN ethtool constant,
which is defined as -1, resulting in value truncation and
thus incorrect test results against SPEED_UNKNOWN.

For example, the following test will print "False":

    u16 speed = SPEED_UNKNOWN;

    if (speed == SPEED_UNKNOWN)
        printf("True");
    else
        printf("False");

Change storage of speed to use u32 to avoid this issue.

Signed-off-by: Michael Zhivich <mzhiv...@akamai.com>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h 
b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 0c443ea..374a4d4 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -497,7 +497,7 @@ struct qlcnic_hardware_context {
        u16 board_type;
        u16 supported_type;
 
-       u16 link_speed;
+       u32 link_speed;
        u16 link_duplex;
        u16 link_autoneg;
        u16 module_type;
-- 
2.7.4