Two additional register ranges needs to be described within the Ocelot
device tree node: the VCAP and the PTP ones. This patch documents the
binding needed to do so.
Signed-off-by: Antoine Tenart <antoine.ten...@bootlin.com>
---
Documentation/devicetree/bindings/net/mscc-ocelot.txt | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt
b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
index 9e5c17d426ce..08bc8d7f0c99 100644
--- a/Documentation/devicetree/bindings/net/mscc-ocelot.txt
+++ b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
@@ -11,7 +11,9 @@ Required properties:
- reg-names: Must include the following entries:
- "sys"
- "rew"
+ - "vcap"
- "qs"
+ - "ptp"
- "qsys"
- "ana"
- "portX" with X from 0 to the number of last port index available on that
@@ -43,7 +45,9 @@ Example:
compatible = "mscc,vsc7514-switch";
reg = <0x1010000 0x10000>,
<0x1030000 0x10000>,
+ <0x1060000 0x10000>,
<0x1080000 0x100>,
+ <0x10e0000 0x10000>,
<0x11e0000 0x100>,
<0x11f0000 0x100>,
<0x1200000 0x100>,
@@ -57,9 +61,10 @@ Example:
<0x1280000 0x100>,
<0x1800000 0x80000>,
<0x1880000 0x10000>;
- reg-names = "sys", "rew", "qs", "port0", "port1", "port2",
- "port3", "port4", "port5", "port6", "port7",
- "port8", "port9", "port10", "qsys", "ana";
+ reg-names = "sys", "rew", "vcap", "qs", "ptp", "port0",
+ "port1", "port2", "port3", "port4", "port5",
+ "port6", "port7", "port8", "port9", "port10",
+ "qsys", "ana";
interrupts = <21 22>;
interrupt-names = "xtr", "inj";
--
2.20.1
