On 1/8/19 8:29 AM, Vinod Koul wrote:
> For RGMII mode, phy delay should be disabled. Add this case along
> with disable delay routines.
>
> Signed-off-by: Vinod Koul <vk...@kernel.org>
> ---
> drivers/net/phy/at803x.c | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
> index f9432d053a22..e7cf1d5b0514 100644
> --- a/drivers/net/phy/at803x.c
> +++ b/drivers/net/phy/at803x.c
> @@ -122,6 +122,18 @@ static inline int at803x_enable_tx_delay(struct
> phy_device *phydev)
> AT803X_DEBUG_TX_CLK_DLY_EN);
> }
>
> +static inline int at803x_disable_rx_delay(struct phy_device *phydev)
> +{
> + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
> + AT803X_DEBUG_RX_CLK_DLY_EN, 0);
> +}
> +
> +static inline int at803x_disable_tx_delay(struct phy_device *phydev)
> +{
> + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
> + AT803X_DEBUG_TX_CLK_DLY_EN, 0);
> +}
> +
> /* save relevant PHY registers to private copy */
> static void at803x_context_save(struct phy_device *phydev,
> struct at803x_context *context)
> @@ -269,6 +281,15 @@ static int at803x_config_init(struct phy_device *phydev)
> return ret;
> }
>
> + if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
> + ret = at803x_disable_rx_delay(phydev);
> + if (ret < 0)
> + return ret;
> + ret = at803x_disable_tx_delay(phydev);
> + if (ret < 0)
> + return ret;
> + }
This looks right in that PHY_INTERFACE_MODE_RGMII from the perspective
of the PHY means no TX/RX delays, but you would also have to take care
of PHY_INTERFACE_MODE_RGMII_TXID and disable the RX delay in that case,
and PHY_INTERFACE_MODE_RGMII_RXID and disabled the TX delay in that case.
Thanks!
--
Florian
