From: [email protected] <[email protected]>
> All other calls to phy_set_max_speed() use the SPEED_ prefix. Make the
> FEC driver follow this common pattern. This makes no different to
> generated code since SPEED_1000 is 1000, and SPEED_100 is 100.
>
Please also add more information that was introduced by commit: 58056c1e1b0e
("net: ethernet: Use phy_set_max_speed() to limit advertised speed ")
Andy
> Reported-by: Corentin Labbe <[email protected]>
> Signed-off-by: Andrew Lunn <[email protected]>
> ---
> drivers/net/ethernet/freescale/fec_main.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/fec_main.c
> b/drivers/net/ethernet/freescale/fec_main.c
> index 6db69ba30dcd..b067eaf8b792 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -1948,7 +1948,7 @@ static int fec_enet_mii_probe(struct
> net_device *ndev)
>
> /* mask with MAC supported features */
> if (fep->quirks & FEC_QUIRK_HAS_GBIT) {
> - phy_set_max_speed(phy_dev, 1000);
> + phy_set_max_speed(phy_dev, SPEED_1000);
> phy_remove_link_mode(phy_dev,
> ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
> #if !defined(CONFIG_M5272)
> @@ -1956,7 +1956,7 @@ static int fec_enet_mii_probe(struct
> net_device *ndev) #endif
> }
> else
> - phy_set_max_speed(phy_dev, 100);
> + phy_set_max_speed(phy_dev, SPEED_100);
>
> fep->link = 0;
> fep->full_duplex = 0;
> --
> 2.19.0
