All other calls to phy_set_max_speed() use the SPEED_ prefix. Make the
FEC driver follow this common pattern. This makes no different to
generated code since SPEED_1000 is 1000, and SPEED_100 is 100.
Reported-by: Corentin Labbe <cla...@baylibre.com>
Signed-off-by: Andrew Lunn <and...@lunn.ch>
---
drivers/net/ethernet/freescale/fec_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c
b/drivers/net/ethernet/freescale/fec_main.c
index 6db69ba30dcd..b067eaf8b792 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1948,7 +1948,7 @@ static int fec_enet_mii_probe(struct net_device *ndev)
/* mask with MAC supported features */
if (fep->quirks & FEC_QUIRK_HAS_GBIT) {
- phy_set_max_speed(phy_dev, 1000);
+ phy_set_max_speed(phy_dev, SPEED_1000);
phy_remove_link_mode(phy_dev,
ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
#if !defined(CONFIG_M5272)
@@ -1956,7 +1956,7 @@ static int fec_enet_mii_probe(struct net_device *ndev)
#endif
}
else
- phy_set_max_speed(phy_dev, 100);
+ phy_set_max_speed(phy_dev, SPEED_100);
fep->link = 0;
fep->full_duplex = 0;
--
2.19.0
