From: Mariusz Stachura <mariusz.stach...@intel.com>

This patch introduces new ethtool private flag used for
forcing true link state. Function i40e_force_link_state that implements
this functionality was added, it sets phy_type = 0 in order to
work-around firmware's LESM. False positive error messages were
suppressed.

Signed-off-by: Mariusz Stachura <mariusz.stach...@intel.com>
Signed-off-by: Mitch Williams <mitch.a.willi...@intel.com>
Tested-by: Andrew Bowers <andrewx.bow...@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirs...@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c |  2 +
 drivers/net/ethernet/intel/i40e/i40e_main.c    | 71 ++++++++++++++++++++++++++
 2 files changed, 73 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c 
b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 34173f821fd9..50908f343221 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -230,6 +230,8 @@ static const struct i40e_priv_flags 
i40e_gstrings_priv_flags[] = {
        I40E_PRIV_FLAG("flow-director-atr", I40E_FLAG_FD_ATR_ENABLED, 0),
        I40E_PRIV_FLAG("veb-stats", I40E_FLAG_VEB_STATS_ENABLED, 0),
        I40E_PRIV_FLAG("hw-atr-eviction", I40E_FLAG_HW_ATR_EVICT_ENABLED, 0),
+       I40E_PRIV_FLAG("link-down-on-close",
+                      I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED, 0),
        I40E_PRIV_FLAG("legacy-rx", I40E_FLAG_LEGACY_RX, 0),
        I40E_PRIV_FLAG("disable-source-pruning",
                       I40E_FLAG_SOURCE_PRUNING_DISABLED, 0),
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c 
b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 666d2e7781e1..41fbccd41641 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6600,6 +6600,72 @@ int i40e_up(struct i40e_vsi *vsi)
        return err;
 }
 
+/**
+ * i40e_force_link_state - Force the link status
+ * @pf: board private structure
+ * @is_up: whether the link state should be forced up or down
+ **/
+static void i40e_force_link_state(struct i40e_pf *pf, bool is_up)
+{
+       struct i40e_aq_get_phy_abilities_resp abilities;
+       struct i40e_aq_set_phy_config config = {0};
+       struct i40e_hw *hw = &pf->hw;
+       enum i40e_aq_phy_type cnt;
+       u64 mask = 0;
+       i40e_status err;
+
+       /* Get the current phy config */
+       err = i40e_aq_get_phy_capabilities(hw, false, false, &abilities,
+                                          NULL);
+       if (err)
+               dev_dbg(&pf->pdev->dev,
+                       "failed to get phy cap., ret =  %s last_status =  %s\n",
+                       i40e_stat_str(hw, err),
+                       i40e_aq_str(hw, hw->aq.asq_last_status));
+
+       /* If link needs to go up, but was not forced to go down,
+        * no need for a flap
+        */
+       if (is_up && abilities.phy_type != 0)
+               return;
+
+       /* To force link we need to set bits for all supported PHY types,
+        * but there are now more than 32, so we need to split the bitmap
+        * across two fields.
+        */
+       for (cnt = I40E_PHY_TYPE_SGMII; cnt < I40E_PHY_TYPE_MAX; cnt++)
+               mask |= (1ULL << cnt);
+
+       config.phy_type = is_up ? cpu_to_le32((u32)(mask & 0xffffffff)) : 0;
+       config.phy_type_ext = is_up ? (u8)((mask >> 32) & 0xff) : 0;
+       /* Copy the old settings, except of phy_type */
+       config.abilities = abilities.abilities;
+       config.link_speed = abilities.link_speed;
+       config.eee_capability = abilities.eee_capability;
+       config.eeer = abilities.eeer_val;
+       config.low_power_ctrl = abilities.d3_lpan;
+       err = i40e_aq_set_phy_config(hw, &config, NULL);
+
+       if (err)
+               dev_dbg(&pf->pdev->dev,
+                       "set phy config ret =  %s last_status =  %s\n",
+                       i40e_stat_str(&pf->hw, err),
+                       i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+
+       /* Update the link info */
+       err = i40e_update_link_info(hw);
+       if (err) {
+               /* Wait a little bit (on 40G cards it sometimes takes a really
+                * long time for link to come back from the atomic reset)
+                * and try once more
+                */
+               msleep(1000);
+               i40e_update_link_info(hw);
+       }
+
+       i40e_aq_set_link_restart_an(hw, true, NULL);
+}
+
 /**
  * i40e_down - Shutdown the connection processing
  * @vsi: the VSI being stopped
@@ -6617,6 +6683,9 @@ void i40e_down(struct i40e_vsi *vsi)
        }
        i40e_vsi_disable_irq(vsi);
        i40e_vsi_stop_rings(vsi);
+       if (vsi->type == I40E_VSI_MAIN &&
+           vsi->back->flags & I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED)
+               i40e_force_link_state(vsi->back, false);
        i40e_napi_disable_all(vsi);
 
        for (i = 0; i < vsi->num_queue_pairs; i++) {
@@ -7578,6 +7647,8 @@ int i40e_open(struct net_device *netdev)
 
        netif_carrier_off(netdev);
 
+       i40e_force_link_state(pf, true);
+
        err = i40e_vsi_open(vsi);
        if (err)
                return err;
-- 
2.15.1

Reply via email to