On Wed, 25 Jan 2017 10:50:51 +0800
Hayes Wang <hayesw...@realtek.com> wrote:
> Adjust the setting of the flag of SELECTIVE_SUSPEND to prevent start_xmit()
> from calling napi_schedule() directly during runtime suspend.
>
> After calling napi_disable() or clearing the flag of WORK_ENABLE,
> scheduling the napi is useless.
>
> Signed-off-by: Hayes Wang <hayesw...@realtek.com>
> ---
> drivers/net/usb/r8152.c | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
> index e1466b4..27b0b44 100644
> --- a/drivers/net/usb/r8152.c
> +++ b/drivers/net/usb/r8152.c
> @@ -3585,10 +3585,13 @@ static int rtl8152_rumtime_suspend(struct r8152 *tp)
> struct net_device *netdev = tp->netdev;
> int ret = 0;
>
> + set_bit(SELECTIVE_SUSPEND, &tp->flags);
> +
> if (netif_running(netdev) && test_bit(WORK_ENABLE, &tp->flags)) {
> u32 rcr = 0;
>
> if (delay_autosuspend(tp)) {
> + clear_bit(SELECTIVE_SUSPEND, &tp->flags);
> ret = -EBUSY;
> goto out1;
> }
> @@ -3605,6 +3608,7 @@ static int rtl8152_rumtime_suspend(struct r8152 *tp)
> if (!(ocp_data & RXFIFO_EMPTY)) {
> rxdy_gated_en(tp, false);
> ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, rcr);
> + clear_bit(SELECTIVE_SUSPEND, &tp->flags);
> ret = -EBUSY;
If you are going to start using bit operations then you may need
smp_mb_before/after_atomic.
