On Mon, Dec 05, 2016 at 09:27:58PM +0800, Dongpo Li wrote:
> The "hix5hd2" is SoC name, add the generic ethernet driver name.
> The "hisi-gemac-v1" is the basic version and "hisi-gemac-v2" adds
> the SG/TXCSUM/TSO/UFO features.
>
> Signed-off-by: Dongpo Li <lidon...@hisilicon.com>
> ---
> .../devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt | 9 +++++++--
> drivers/net/ethernet/hisilicon/hix5hd2_gmac.c | 15
> +++++++++++----
> 2 files changed, 18 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt
> b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt
> index 75d398b..75920f0 100644
> --- a/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt
> +++ b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt
> @@ -1,7 +1,12 @@
> Hisilicon hix5hd2 gmac controller
>
> Required properties:
> -- compatible: should be "hisilicon,hix5hd2-gmac".
> +- compatible: should contain one of the following SoC strings:
> + * "hisilicon,hix5hd2-gemac"
> + * "hisilicon,hi3798cv200-gemac"
> + and one of the following version string:
> + * "hisilicon,hisi-gemac-v1"
> + * "hisilicon,hisi-gemac-v2"
What combinations are valid? I assume both chips don't have both v1 and
v2. 2 SoCs and 2 versions so far, I don't think there is much point to
have the v1 and v2 compatible strings.
> - reg: specifies base physical address(s) and size of the device registers.
> The first region is the MAC register base and size.
> The second region is external interface control register.
> @@ -20,7 +25,7 @@ Required properties:
>
> Example:
> gmac0: ethernet@f9840000 {
> - compatible = "hisilicon,hix5hd2-gmac";
> + compatible = "hisilicon,hix5hd2-gemac",
> "hisilicon,hisi-gemac-v1";
You can't just change compatible strings.
> reg = <0xf9840000 0x1000>,<0xf984300c 0x4>;
> interrupts = <0 71 4>;
> #address-cells = <1>;
