commit 24180333206519e6b0c4633eab81e773b4527cac > author Jesse Brandeburg <[EMAIL PROTECTED]> Wed, 18 Jan 2006 07:01:06 -0800 > committer Jeff Garzik <[EMAIL PROTECTED]> Wed, 18 Jan 2006 05:15:15 -0500 > > [PATCH] e100: Fix TX hang and RMCP Ping issue (due to a microcode loading > issue) > > e100: Fix TX hang and RMCP Ping issue (due to a microcode loading issue) > > Set the end of list bit to cause the hardware's transmit state machine to > work correctly and not prevent management (BMC) traffic.
> @@ -1388,7 +1422,7 @@ static int e100_hw_init(struct nic *nic) > return err; > if((err = e100_exec_cmd(nic, ruc_load_base, 0))) > return err; > - if((err = e100_exec_cb(nic, NULL, e100_load_ucode))) > + if ((err = e100_exec_cb_wait(nic, NULL, e100_setup_ucode))) > return err; > if((err = e100_exec_cb(nic, NULL, e100_configure))) > return err; this commit for 2.6.16-rc2 causes ethtool -t eth0 trouble on an IBM pSeries 630. It triggers EEH errors, and also a bug in the eehd, but thats unrelated. It shouldnt trigger the EEH errors in the first place. Any ideas how to fix it? If I change the e100_exec_cb_wait() call back to e100_exec_cb(), no errors are triggered. But the ethtool -t test fails. http://ozlabs.org/pipermail/linuxppc-dev/2006-February/021308.html - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
