On 3/3/06, Olaf Hering <[EMAIL PROTECTED]> wrote: > On Tue, Feb 28, Jesse Brandeburg wrote: > > > On Tue, 28 Feb 2006, Olaf Hering wrote: > > > > >On Mon, Feb 27, Jesse Brandeburg wrote: > > > > > >>>http://ozlabs.org/pipermail/linuxppc-dev/2006-February/021308.html > > >> > > >> > > >>Olaf I reproduced this problem on a 630 and this patch fixes it for me, > > >>please verify. Due to the new load ucode command the cb list must be > > >>allocated before calling e100_init_hw. Ignore the crazy paths on the > > >>files. (patch -p1 should take care of) > > > > > >Yes, this patch helps. Thanks. > > > > Ooch, I realized this morning I made a memory leak, here is the repaired > > version of the patch: > > BTW do you notice the system seeming to stall while this ethtool test is > > running? > > No, it appears to work ok during ethtool -t eth2, there was only a very > short stall, less than a second. > > ( sleep 3 ; ethtool -t eth2 ; ethtool -t eth3 ) & > while dmesg ; do : ; done
thanks for testing, I wonder if there is something wrong with my 630, oh well. Jesse - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
