2009/9/26 Buzzer <[email protected]>
> /etc/rc.shutdown in progress...
> /etc/rc.shutdown complete.
> syncing disks...
>
> And thats all, folk. Once I was sitting 4 minutes near my PC and
> waiting for power off. Then I manually turned off the power. This
> problem may repeat from time to time on 'reboot' and 'halt -p'
> commands.
>
> Yesterday I got tired of waiting and I went to watch TV. When I
> returned, nothing has changed - the same message on my display, power
> off did not happen.
>
> I have use OpenBSD 4.5 and execute 'halt -p' or 'reboot' commands once
> per day.
>
> OpenBSD 4.5 (200909202109) #0: Sun Sep 20 22:18:12 2009
> r...@localhost:/sys/arch/i386/compile/200909202109
> cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 349 MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
> real mem = 334000128 (318MB)
> avail mem = 314273792 (299MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 02/05/01, BIOS32 rev. 0 @ 0xfb1b0,
> SMBIOS rev. 2.1 @ 0xf0800 (29 entries)
> bios0: vendor Award Software International, Inc. version "4.51 PG" date
> 02/05/01
> bios0: Giga-Byte Technology CO., LTD i440BX-W977
> apm0 at bios0: Power Management spec V1.2 (slowidle)
> apm0: AC on, battery charge unknown
> acpi at bios0 function 0x0 not configured
> bios0: ROM list: 0xc0000/0xc600!
> wd0 at pciide0 channel 0 drive 0: <ST340016A>
> wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
> wd1 at pciide0 channel 0 drive 1: <FUJITSU MPC3064AT>
> wd1: 16-sector PIO, LBA, 6187MB, 12672450 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
> wd2 at pciide0 channel 1 drive 0: <ST3160815A>
> wd2: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
> atapiscsi0 at pciide0 channel 1 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-5200A, 1.04> ATAPI
> 5/cdrom removable
> wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
> mtrr: Pentium Pro MTRR support
> softraid0 at root
> root on wd2a swap on wd2b dump on wd2b
> WARNING: / was not properly unmounted
> wsdisplay0: screen 1 added (80x25bf, vt100 emulation)
> wsdisplay0: screen 2 added (80x25bf, vt100 emulation)
>
> --
> /Buzzer
>
>
Hi did you try: shutdown -hp now?
I tested that on my old pc running 4.3 and works ok.
Greetings
--
Atentamente
Andris Genovez Tobar / Sistemas
COMERCIAL SALVADOR PACHECO MORA S.A. / DESDE 1945
Tecnologmas
Cuenca, Luis Cordero 9-70 y Gran Colombia
Telifono. 593-7-2842388 ext 408
Fax. 593-7-2842388 ext 120
Celular 593-97670874
593-96816996 Alegro
Mail: [email protected]
Personal: [email protected]
www.cspmsa.com
www.crice.org
