I checkout the newest for azalia, now anything is okay,
my dmesg is:
OpenBSD 4.5 (GENERIC.MP) #1: Fri May 8 21:57:45 GMT 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz ("GenuineIntel"
686-class) 1.50 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR
real mem = 1064574976 (1015MB)
avail mem = 1021501440 (974MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/25/07, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.4 @ 0xf06a0 (34 entries)
bios0: vendor American Megatrends Inc. version "0042" date 06/25/2007
bios0: ASUSTeK Computer INC. Z62E
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI
acpi0: wakeup devices P0P2(S4) P0P1(S4) USB0(S4) USB1(S4) USB2(S4)
USB3(S4) EUSB(S4) P0P4(S4) P0P5(S4) P0P7(S4) P0P8(S4) P0P9(S4)
USB4(S4) USB5(S4) USBE(S4) P0P6(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 165MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz ("GenuineIntel"
686-class) 1.50 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (P0P1)
acpiprt2 at acpi0: bus 3 (P0P4)
acpiprt3 at acpi0: bus -1 (P0P5)
acpiprt4 at acpi0: bus -1 (P0P7)
acpiprt5 at acpi0: bus -1 (P0P9)
acpiprt6 at acpi0: bus 1 (P0P6)
acpiec0 at acpi0
acpicpu0 at acpi0
acpicpu1 at acpi0
acpitz at acpi0 not configured
acpibat0 at acpi0: BAT0 model "Z62E" serial type LION oem "ASUS"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0xee00!
cpu0: unknown Enhanced SpeedStep CPU, msr 0x0613092806360628
cpu0: using only highest, current and lowest power states
cpu0: Enhanced SpeedStep 1000 MHz (1340 mV): speeds: 1500, 1000, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 10)
drm0 at inteldrm0
"Intel GM965 Video" rev 0x03 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 2
int 16 (irq 10)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 2
int 17 (irq 7)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 2
int 18 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03:
apic 2 int 21 (irq 3)
azalia0: codecs: Realtek ALC883, 0x1543/0x3155, using Realtek ALC883
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 2
int 16 (irq 10)
pci1 at ppb0 bus 3
ppb1 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: apic 2
int 18 (irq 11)
pci2 at ppb1 bus 1
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 2
int 23 (irq 15)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 2
int 19 (irq 5)
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 2
int 18 (irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 2
int 23 (irq 15)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci3 at ppb2 bus 4
"Ricoh 5C832 Firewire" rev 0x05 at pci3 dev 1 function 0 not configured
sdhc0 at pci3 dev 1 function 1 "Ricoh 5C822 SD/MMC" rev 0x22: apic 2
int 17 (irq 7)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x12 at pci3 dev 1 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x12 at pci3 dev 1 function 3 not configured
"Ricoh 5C852 xD" rev 0x12 at pci3 dev 1 function 4 not configured
re0 at pci3 dev 7 function 0 "Realtek 8169SC" rev 0x10:
RTL8169/8110SCd (0x1800), apic 2 int 18 (irq 11), address
00:1b:fc:b6:71:55
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ichpcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, DVD+-RW SDW-082S, LX06> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 2
int 18 (irq 11), AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG HM120JI, YF10> SCSI3 0/direct fixed
sd0: 114473MB, 512 bytes/sec, 234441648 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic
2 int 17 (irq 5)
iic0 at ichiic0
spdmem0 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
ugen0 at uhub1 port 5 "Syntek USB2.0" rev 2.00/0.05 addr 2
uhidev0 at uhub4 port 1 configuration 1 interface 0 "vendor 0x15d9 USB
Mouse" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub5 port 2 configuration 1 interface 0 "vendor 0x04fc USB
Optical Wheel Mouse" rev 2.00/13.11 addr 2
uhidev1: iclass 3/1
ums1 at uhidev1: 3 buttons, Z dir
wsmouse2 at ums1 mux 0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
Shell:~ >: mixerctl
record.adc_mute=off
record.adc=120,120
record.adc2_mute=off
record.adc2=120,120
inputs.mix_source=mic,mic2,cd,beep,hp
inputs.mix_mic=120,120
inputs.mix_mic2=120,120
inputs.mix_cd=120,120
inputs.mix_beep=120,120
inputs.mix_hp=120,120
outputs.mix2=120,120
inputs.mix2_source=dac2,mix
outputs.mix3=120,120
inputs.mix3_source=dac,mix
outputs.mix4=120,120
inputs.mix4_source=dac3,mix
outputs.mix5=120,120
inputs.mix5_source=dac4,mix
outputs.spkr_source=mix4
outputs.spkr_mute=on
outputs.spkr_dir=output
outputs.spkr_boost=off
outputs.hp_source=mix3
outputs.hp_mute=off
inputs.hp=85,85
outputs.hp_dir=output
outputs.hp_boost=off
outputs.mic_source=mix2
outputs.mic_mute=off
inputs.mic=85,85
outputs.mic_dir=input-vr80
outputs.mic_boost=off
inputs.mic2=85,85
outputs.mic2_dir=input-vr80
outputs.SPDIF_source=dig-dac
record.adc2_source=mic,mic2,cd,beep,hp,mix
record.adc_source=mic,mic2,cd,beep,hp,mix
outputs.mix8=120,120
inputs.mix8_source=dac5,mix
outputs.hp_sense=plugged
outputs.mic_sense=unplugged
outputs.spkr_muters=hp,mic
outputs.master=120,120
outputs.master.mute=off
outputs.master.slaves=mix3,mix4,spkr,hp
record.volume=120,120
record.volume.mute=off
record.volume.slaves=adc,adc2
inputs.usingdac=0302040525
--
Best Regards
----
My Chaos: https://n23.appspot.com
On Mon, May 4, 2009 at 08:21, Jacob Meuser <[email protected]> wrote:
> I put a lot of work into azalia(4) in the last release cycel, and I'd
> like to be able to say, when 4.6 release comes, that azalia is
> "completed".
>
> by completed I mean it "just works" as expected, by default, everywhere.
>
> so, if you are using OpenBSD 4.5 or -current, and you have *any*
> issues with azalia(4) (I mean anything, even if it seems "small" or
> is "not really a bug but I change this everytime"), please let me
> know.
>
> thanks.
>
> --
> [email protected]
> SDF Public Access UNIX System - http://sdf.lonestar.org
