On Sun, Mar 08 2009, [email protected] wrote:
On Sat, Mar 07, 2009 at 12:03:15PM -0600, Ed Ahlsen-Girard wrote:
>> Running current from a Feb 28 snapshot, I have found that if either
>> mplayer or gnash (from snapshots) are installed, and if embedded media
>> gain focus in FireFox, the mouse pointer will slide to the right
edge of
>> the window and stay there until the system is restarted. The pointer
>> can be moved up and down along the edge, but will not leave it, and
>> focus cannot be moved to another window. Ctrl-arrow keys have no
>> effect. A gnash core file of 8064892 bytes exists. Dmesg below, core
>> on request.
> what window manager are you using?
I am using fvwm.
>> Ed Ahlsen-Girard
>>
>> OpenBSD 4.4-current (GENERIC) #6: Fri Mar 6 22:42:12 CST 2009
>> [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
>> cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache)
499 MHz
>> cpu0:
>>
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
>> real mem = 335118336 (319MB)
>> avail mem = 315379712 (300MB)
>> mainbus0 at root
>> bios0 at mainbus0: AT/286+ BIOS, date 08/01/01, BIOS32 rev. 0 @
0xffe90,
>> SMBIOS rev. 2.2 @ 0xfb410 (64 entries)
>> bios0: vendor Dell Computer Corporation version "A10" date 08/01/01
>> bios0: Dell Computer Corporation OptiPlex GX1 500Mbr+
>> apm0 at bios0: Power Management spec V1.2
>> apm0: AC on, battery charge unknown
>> acpi at bios0 function 0x0 not configured
>> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
>> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc670/176 (9 entries)
>> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4
ISA" rev
>> 0x00)
>> pcibios0: PCI bus #2 is the last bus
>> bios0: ROM list: 0xc0000/0xd000 0xd0000/0x8000
>> cpu0 at mainbus0: (uniprocessor)
>> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
>> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
>> intelagp0 at pchb0
>> agp0 at intelagp0: aperture at 0xf0000000, size 0x4000000
>> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
>> pci1 at ppb0 bus 1
>> "ATI Rage Pro" rev 0x5c at pci1 dev 0 function 0 not configured
>> piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
>> pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel
>> 0 wired to compatibility, channel 1 wired to compatibility
>> wd0 at pciide0 channel 0 drive 0: <Maxtor 91024D4>>
>> wd0: 16-sector PIO, LBA, 9765MB, 19999728 sectors
>> wd1 at pciide0 channel 0 drive 1: <WDC WD800JB-00JJC0>>
>> wd1: 16-sector PIO, LBA, 76319MB, 156301488 sectors
>> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
>> wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
>> atapiscsi0 at pciide0 channel 1 drive 0
>> scsibus0 at atapiscsi0: 2 targets, initiator 7
>> cd0 at scsibus0 targ 0 lun 0: <HITACHI, CDR-8430, 0024>> ATAPI 5/cdrom
>> removable
>> cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
>> uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
>> piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: SMBus
>> disabled
>> vga1 at pci0 dev 14 function 0 "ATI Radeon 9200 SE Sec" rev 0x01
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> radeondrm0 at vga1: irq 9
>> drm0 at radeondrm0
>> ppb1 at pci0 dev 15 function 0 "DEC 21152 PCI-PCI" rev 0x03
>> pci2 at ppb1 bus 2
>> ohci0 at pci2 dev 11 function 0 "Acer Labs M5237 USB" rev 0x03: irq 9,
>> version 1.0, legacy support
>> ehci0 at pci2 dev 11 function 3 "Acer Labs M5239 USB2" rev 0x01: irq 10
>> usb0 at ehci0: USB revision 2.0
>> uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
>> usb1 at ohci0: USB revision 1.0
>> uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
>> xl0 at pci0 dev 17 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq
11,
>> address 00:c0:4f:22:a7:b8
>> exphy0 at xl0 phy 24: 3Com internal media interface
>> isa0 at piixpcib0
>> isadma0 at isa0
>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> pmsi0 at pckbc0 (aux slot)
>> pckbc0: using irq 12 for aux slot
>> wsmouse0 at pmsi0 mux 0
>> pcppi0 at isa0 port 0x61
>> midi0 at pcppi0: <PC speaker>>
>> spkr0 at pcppi0
>> lpt0 at isa0 port 0x378/4 irq 7
>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
>> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
>> isapnp0 at isa0 port 0x279: read port 0x203
>> wss1 at isapnp0 "CS4236B, CSC0000, , WSS/SB" port
0x534/4,0x388/4,0x220/16
>> irq 5 drq 1,0: CS4236/CS4236B (vers 0)
>> audio0 at wss1
>> joy0 at isapnp0 "CS4236B, CSC000F, , Game" port 0x3a0/8
>> "CS4236B, CSC0010, , Ctrl" at isapnp0 port 0xf00/8 not configured
>> "CS4236B, CSC0003, , MPU" at isapnp0 port 0x330/2 not configured
>> usb2 at uhci0: USB revision 1.0
>> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> biomask ef45 netmask ef45 ttymask ffdf
>> mtrr: Pentium Pro MTRR support
>> ugen0 at uhub1 port 2 "OMNIKEY AG Smart Card Reader USB" rev
1.10/2.00 addr
>> 2
>> softraid0 at root
>> root on wd1a swap on wd1b dump on wd1b
>> radeondrm0: Setting GART location based on new memory map
>> radeondrm0: Loading R200 Microcode
>> radeondrm0: writeback test succeeded in 1 usecs
>>
--
[email protected]
SDF Public Access UNIX System - http://sdf.lonestar.org
