Running current from a Feb 28 snapshot, I have found that if either
mplayer or gnash (from snapshots) are installed, and if embedded media
gain focus in FireFox, the mouse pointer will slide to the right edge of
the window and stay there until the system is restarted. The pointer
can be moved up and down along the edge, but will not leave it, and
focus cannot be moved to another window. Ctrl-arrow keys have no
effect. A gnash core file of 8064892 bytes exists. Dmesg below, core
on request.
Ed Ahlsen-Girard
OpenBSD 4.4-current (GENERIC) #6: Fri Mar 6 22:42:12 CST 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 499 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 335118336 (319MB)
avail mem = 315379712 (300MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/01/01, BIOS32 rev. 0 @ 0xffe90, SMBIOS
rev. 2.2 @ 0xfb410 (64 entries)
bios0: vendor Dell Computer Corporation version "A10" date 08/01/01
bios0: Dell Computer Corporation OptiPlex GX1 500Mbr+
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc670/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xd000 0xd0000/0x8000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xf0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
"ATI Rage Pro" rev 0x5c at pci1 dev 0 function 0 not configured
piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 91024D4>
wd0: 16-sector PIO, LBA, 9765MB, 19999728 sectors
wd1 at pciide0 channel 0 drive 1: <WDC WD800JB-00JJC0>
wd1: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <HITACHI, CDR-8430, 0024> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: SMBus disabled
vga1 at pci0 dev 14 function 0 "ATI Radeon 9200 SE Sec" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 9
drm0 at radeondrm0
ppb1 at pci0 dev 15 function 0 "DEC 21152 PCI-PCI" rev 0x03
pci2 at ppb1 bus 2
ohci0 at pci2 dev 11 function 0 "Acer Labs M5237 USB" rev 0x03: irq 9, version
1.0, legacy support
ehci0 at pci2 dev 11 function 3 "Acer Labs M5239 USB2" rev 0x01: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
xl0 at pci0 dev 17 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq 11,
address 00:c0:4f:22:a7:b8
exphy0 at xl0 phy 24: 3Com internal media interface
isa0 at piixpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
wss1 at isapnp0 "CS4236B, CSC0000, , WSS/SB" port 0x534/4,0x388/4,0x220/16 irq
5 drq 1,0: CS4236/CS4236B (vers 0)
audio0 at wss1
joy0 at isapnp0 "CS4236B, CSC000F, , Game" port 0x3a0/8
"CS4236B, CSC0010, , Ctrl" at isapnp0 port 0xf00/8 not configured
"CS4236B, CSC0003, , MPU" at isapnp0 port 0x330/2 not configured
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask ef45 netmask ef45 ttymask ffdf
mtrr: Pentium Pro MTRR support
ugen0 at uhub1 port 2 "OMNIKEY AG Smart Card Reader USB" rev 1.10/2.00 addr 2
softraid0 at root
root on wd1a swap on wd1b dump on wd1b
radeondrm0: Setting GART location based on new memory map
radeondrm0: Loading R200 Microcode
radeondrm0: writeback test succeeded in 1 usecs
