tried
bioctl -h softraid0
lately?
--
Todd Fries .. [email protected]
_____________________________________________
| \ 1.636.410.0632 (voice)
| Free Daemon Consulting, LLC \ 1.405.227.9094 (voice)
| http://FreeDaemonConsulting.com \ 1.866.792.3418 (FAX)
| "..in support of free software solutions." \ 250797 (FWD)
| \
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
37E7 D3EB 74D0 8D66 A68D B866 0326 204E 3F42 004A
http://todd.fries.net/pgp.txt
Penned by Michael on 20081212 11:15.55, we have:
| Hi,
|
| is it somehow possible to read the type of a softraid partition?
|
| When I have the following... (it actually is a crypto raid volume) ...
| how could I figure out if it is RAID 0, 1 or C?
|
|
| # fdisk sd0
| Disk: sd0 geometry: 491/255/63 [7897088 Sectors]
| Offset: 0 Signature: 0xAA55
| Starting Ending LBA Info:
| #: id C H S - C H S [ start: size ]
|
-------------------------------------------------------------------------------
| 0: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
| 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
| 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
| *3: A6 0 1 1 - 490 254 63 [ 63: 7887852 ] OpenBSD
|
| # disklabel sd0
| # Inside MBR partition 3: type A6 start 63 size 7887852
| # /dev/rsd0c:
| type: SCSI
| disk: SCSI disk
| label:
| flags:
| bytes/sector: 512
| sectors/track: 63
| tracks/cylinder: 255
| sectors/cylinder: 16065
| cylinders: 491
| total sectors: 7897088
| rpm: 3600
| interleave: 1
| trackskew: 0
| cylinderskew: 0
| headswitch: 0 # microseconds
| track-to-track seek: 0 # microseconds
| drivedata: 0
|
| 16 partitions:
| # size offset fstype [fsize bsize cpg]
| a: 7887852 63 RAID
| c: 7897088 0 unused 0 0
|
| # bioctl sd0
| sd0: <, , 0.00>, serial \\037 0.00
|
| # bioctl sd0a
| sd0a: <, , 0.00>, serial \\037 0.00
