Hi,
is it somehow possible to read the type of a softraid partition?
When I have the following... (it actually is a crypto raid volume) ...
how could I figure out if it is RAID 0, 1 or C?
# fdisk sd0
Disk: sd0 geometry: 491/255/63 [7897088 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-------------------------------------------------------------------------------
0: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
*3: A6 0 1 1 - 490 254 63 [ 63: 7887852 ] OpenBSD
# disklabel sd0
# Inside MBR partition 3: type A6 start 63 size 7887852
# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label:
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 491
total sectors: 7897088
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # microseconds
track-to-track seek: 0 # microseconds
drivedata: 0
16 partitions:
# size offset fstype [fsize bsize cpg]
a: 7887852 63 RAID
c: 7897088 0 unused 0 0
# bioctl sd0
sd0: <, , 0.00>, serial \\037 0.00
# bioctl sd0a
sd0a: <, , 0.00>, serial \\037 0.00
