* Aaron Glenn <[EMAIL PROTECTED]> [2008-03-05 12:24:24]:
> Greets,
>
> I've got a 2623DDU IBM Thinkpad T60p with a built in Sierra Wireless
> MC5720 EVDO card and can't get it to recognize properly. Below is the
> relevant dmesg snippet; after reading all relevant man pages (twice,
> no less) I'm still at a loss. I'd appreciate a cluebat hit. I'm about
> to fire up a 4.3 snapshot to test out snmpd -- here's to hoping it
> automagically works :)
>
> Thanks,
> Aaron
>
> OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Genuine Intel(R) CPU T2500 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
> real mem = 2145873920 (2046MB)
> avail mem = 2067337216 (1971MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 05/24/06, BIOS32 rev. 0 @
> 0xfd6b0, SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
> bios0: vendor LENOVO version "79ET61WW (1.06 )" date 05/24/2006
> bios0: LENOVO 2623DDU
> pcibios0 at bios0: rev 2.1 @ 0xfd640/0x9c0
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #22 is the last bus
> bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000
> 0xdc000/0x4000! 0xe0000/0x10000
> acpi at mainbus0 not configured
> cpu0 at mainbus0
> cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130c2c06000613
> cpu0: using only highest and lowest power states
> cpu0: Enhanced SpeedStep 1000 MHz (1004 mV): speeds: 2000, 1000 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
> ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x71c4 rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: irq 11
> azalia0: host: High Definition Audio rev. 1.0
> azalia0: codec: Analog Devices AD1981HD (rev. 2.0), HDA version 1.0
> azalia0: codec: Conexant/0x2bfa (rev. 0.0), HDA version 0.9
> azalia0: codec[1]: No support for modem function groups
> azalia0: codec[1]: No audio function groups
> audio0 at azalia0
> ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
> pci2 at ppb1 bus 2
> em0 at pci2 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: irq
> 11, address 00:16:41:56:8f:37
> ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
> pci3 at ppb2 bus 3
> wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
> irq 11, MoW1, address 00:13:02:4a:20:23
> ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
> pci4 at ppb3 bus 4
> ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
> pci5 at ppb4 bus 12
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 11
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 11
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 11
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 11
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
> ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci6 at ppb5 bus 21
> cbb0 at pci6 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: irq 11
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
> pcmcia0 at cardslot0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4083N, 1.08> SCSI0
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI SATA" rev 0x02:
> irq 11, AHCI 1.1
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, HTS721010G9SA00, MCZI> SCSI2 0/direct
> fixed
> sd0: 95396MB, 12161 cyl, 255 head, 63 sec, 512 bytes/sec, 195371568 sec total
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: irq 11
> iic0 at ichiic0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> biomask effd netmask effd ttymask ffff
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> ugen0 at uhub2 port 1ugen1 at uhub4 port 1
> ugen0: Sierra Wireless Sierra Wireless MC5720 Modem, rev 1.10/0.01, addr 2
>
> ugen1: Broadcom Corp BCM2045B, rev 2.00/1.00, addr 2
> ugen2 at uhub4 port 2
> ugen2: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 3
> dkcsum: sd0 matches BIOS drive 0x80
> root on sd0a swap on sd0b dump on sd0b
>
>
And did you see this in the man page?
CAVEATS
For Verizon Wireless (and possibly other services), cards require a one-
time activation before they will work; umsm does not currently support
this.
--
Travers Buda