I am very frequently using usb sticks (as in "many times a day") and I
have never had a problem, on different hardware, with different obsd:
4.0, 4.1, 4.2, -current
2007/12/22, Vijay Sankar <[EMAIL PROTECTED]>:
> On December 22, 2007 06:20:55 am Edd Barrett wrote:
> > Hi there,
> >
> > I have been seeing some very odd behavior on 4.2-current recently.
> >
> > I use hotplug. My workstation at work frequently reboots upon insertion of
> > a usb stick. This may be an electronic fault, but my main workstation at
> > home (same hardware exactly), can panic like so:
> >
> > ---8<---
> > cd /mnt/hot/sd0
> > mkdir mo
> > uvm_fault(0xd07a2040, 0xf2e7b000, 0, 1) -> e
> > kernel: page fault trap, code=0
> > Stopped at updatefats+0x3c testl %eax,0(%esi,%edx,4)
> > ddb>
> > ---8<---
> >
> > Unfortunatley the ddb prompt does not respond to my USB keyboard. It seems
> > to be repeatable, so I will dig around for a serial line or ps2 keyboard if
> > I don't hear anything back before sunday (when I have time). Hopefully then
> > I can get a backtrace.
> >
> > Dmesg follows (with USB stick inserted):
> > ---8<---
> > OpenBSD 4.2-current (GENERIC) #592: Sun Dec 9 17:44:05 MST 2007
> > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> > cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL
> >USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR real mem =
> > 2397855744 (2286MB)
> > avail mem = 2310959104 (2203MB)
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 04/05/04, BIOS32 rev. 0 @ 0xf0010,
> > SMBIOS rev. 2.3 @ 0xfbe40 (76 entries)
> > bios0: vendor Intel Corp. version "BF86510A.86A.0058.P15.0404050012" date
> > 04/05/2004
> > bios0: Intel Corporation D865GLC
> > apm0 at bios0: Power Management spec V1.2
> > apm0: AC on, battery charge unknown
> > acpi at bios0 function 0x0 not configured
> > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3d00/224 (12 entries)
> > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev
> > 0x00) pcibios0: PCI bus #2 is the last bus
> > bios0: ROM list: 0xc0000/0xa200! 0xca800/0x1000 0xcb800/0x1000
> > cpu0 at mainbus0
> > pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> > pchb0 at pci0 dev 0 function 0 "Intel 82865G/PE/P CPU-I/0-1" rev 0x02
> > agp0 at pchb0: aperture at 0xf0000000, size 0x8000000
> > vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > ppb0 at pci0 dev 3 function 0 "Intel 82865G/PE/P CPU-CSA" rev 0x02
> > pci1 at ppb0 bus 1
> > em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547EI)" rev 0x00: irq 10,
> > address 00:0c:f1:f5:13:3c
> > uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
> > uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 5
> > uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 10
> > uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: irq 11
> > ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 9
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
> > pci2 at ppb1 bus 2
> > ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02: 24-bit
> > timer at 3579545Hz
> > pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
> > channel 0 configured to compatibility, channel 1 configured to
> > compatibility wd0 at pciide0 channel 0 drive 0: <Maxtor 6E040L0>
> > wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors
> > wd1 at pciide0 channel 0 drive 1: <HDS728080PLAT20>
> > wd1: 16-sector PIO, LBA48, 78533MB, 160836480 sectors
> > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
> > wd2 at pciide0 channel 1 drive 0: <IC35L060AVV207-0>
> > wd2: 16-sector PIO, LBA48, 58644MB, 120103200 sectors
> > atapiscsi0 at pciide0 channel 1 drive 1
> > scsibus0 at atapiscsi0: 2 targets
> > cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1302, 1006> SCSI0
> > 5/cdrom removable
> > wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
> > cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
> > pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA,
> > channel 0 configured to native-PCI, channel 1 configured to native-PCI
> > pciide1: using irq 10 for native-PCI interrupt
> > ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 3
> > iic0 at ichiic0
> > adt0 at iic0 addr 0x2e: emc6d100 rev 0x65
> > spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
> > spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
> > spdmem2 at iic0 addr 0x52: 256MB DDR SDRAM non-parity PC2700CL2.5
> > spdmem3 at iic0 addr 0x53: 1GB DDR SDRAM non-parity PC3200CL3.0
> > usb1 at uhci0: USB revision 1.0
> > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb2 at uhci1: USB revision 1.0
> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci2: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at uhci3: USB revision 1.0
> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at ichpcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pcppi0 at isa0 port 0x61
> > midi0 at pcppi0: <PC speaker>
> > spkr0 at pcppi0
> > lpt0 at isa0 port 0x378/4 irq 7
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > biomask ff6d netmask ff6d ttymask ffef
> > mtrr: Pentium Pro MTRR support
> > uhidev0 at uhub2 port 2 configuration 1 interface 0 "Sun Microsystems Type
> > 6 Mouse" rev 1.00/1.02 addr 2
> > uhidev0: iclass 3/1
> > ums0 at uhidev0: 3 buttons
> > wsmouse0 at ums0 mux 0
> > uhidev1 at uhub1 port 1 configuration 1 interface 0 "Sun Microsystems Type
> > 6 Keyboard" rev 1.00/1.01 addr 2
> > uhidev1: iclass 3/1
> > ukbd0 at uhidev1: 8 modifier keys, 6 key codes, layout 32
> > wskbd1 at ukbd0 mux 1
> > wskbd1: connecting to wsdisplay0
> > uaudio0 at uhub3 port 2 configuration 1 interface 0 "M Audio MobilePre" rev
> > 1.10/1.03 addr 2
> > uaudio0: audio rev 1.00, 9 mixer controls
> > audio0 at uaudio0
> > softraid0 at root
> > dkcsum: wd0 matches BIOS drive 0x82
> > dkcsum: wd1 matches BIOS drive 0x81
> > dkcsum: wd2 matches BIOS drive 0x80
> > root on wd0a swap on wd0b dump on wd0b
> > WARNING: / was not properly unmounted
> > umass0 at uhub0 port 2 configuration 1 interface 0 "Easy Disk" rev
> > 2.00/1.10 addr 2
> > umass0: using SCSI over Bulk-Only
> > scsibus1 at umass0: 2 targets
> > sd0 at scsibus1 targ 1 lun 0: <Easy, Disk, V1.1> SCSI0 0/direct removable
> > sd0: 3936MB, 501 cyl, 255 head, 63 sec, 512 bytes/sec, 8060928 sec total
> > ---8<---
>
> Good day,
>
> I know very little about hardware but noticed in your dmesg that
>
> > spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
> > spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
> > spdmem2 at iic0 addr 0x52: 256MB DDR SDRAM non-parity PC2700CL2.5
> > spdmem3 at iic0 addr 0x53: 1GB DDR SDRAM non-parity PC3200CL3.0
>
> I wonder whether that has something to do with the problem you described.
>
> Anyways I had compiled -current yesterday and just now tried a USB stick
> without any problems.
>
> From /var/log/messages
>
> Dec 22 06:40:25 web1 /bsd: umass0 at uhub0 port 5 configuration 1 interface
> 0 "Genesys USB Reader" rev 2.00/93.17 addr 2
> Dec 22 06:40:25 web1 /bsd: umass0: using SCSI over Bulk-Only
> Dec 22 06:40:25 web1 /bsd: scsibus2 at umass0: 2 targets
> Dec 22 06:40:25 web1 /bsd: sd0 at scsibus2 targ 1 lun 0: <Generic, STORAGE
> DEVICE, 9317> SCSI0 0/direct removable
> Dec 22 06:40:25 web1 /bsd: sd0: drive offline
> Dec 22 06:40:25 web1 /bsd: sd1 at scsibus2 targ 1 lun 1: <Generic, STORAGE
> DEVICE, 9317> SCSI0 0/direct removable
> Dec 22 06:40:25 web1 /bsd: sd1: drive offline
> Dec 22 06:40:25 web1 /bsd: ugen0 at uhub0 port 9 "Realtek RTL8187" rev
> 2.00/1.00 addr 3
> Dec 22 06:40:25 web1 /bsd: softraid0 at root
> Dec 22 06:40:25 web1 /bsd: root on wd0a swap on wd0b dump on wd0b
> Dec 22 06:40:25 web1 savecore: no core dump
> Dec 22 06:41:01 web1 /bsd: umass1 at uhub0
> Dec 22 06:41:01 web1 /bsd: port 8 configuration 1 interface 0 "Flash Drive
> AL_USB20" rev 2.00/2.00 addr 4
> Dec 22 06:41:01 web1 /bsd: umass1: using SCSI over Bulk-Only
> Dec 22 06:41:01 web1 /bsd: scsibus3 at umass1: 2 targets
> Dec 22 06:41:01 web1 /bsd: sd2 at scsibus3 targ 1 lun 0: <Flash, Drive
> AL_USB20, 1.00> SCSI2 0/direct removable
> Dec 22 06:41:01 web1 /bsd: sd2: 3974MB, 506 cyl, 255 head, 63 sec, 512
> bytes/sec, 8139776 sec total
> Dec 22 06:41:51 web1 /bsd: sd2 detached
> Dec 22 06:41:51 web1 /bsd: scsibus3 detached
> Dec 22 06:41:51 web1 /bsd: umass1 detached
>
> Here is my dmesg
>
> OpenBSD 4.2-current (GENERIC.MP) #0: Fri Dec 21 13:27:32 CST 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz ("GenuineIntel" 686-class) 2.14
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> real mem = 3219681280 (3070MB)
> avail mem = 3120087040 (2975MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 12/05/06, BIOS32 rev. 0 @ 0xfbe30,
> SMBIOS rev. 2.4 @ 0xf0000 (71 entries)
> bios0: vendor Phoenix Technologies, LTD version "ASUS P5N32-SLI PREMIUM ACPI
> BIOS Revision 0603" date 12/05/2006
> bios0: ASUSTeK Computer INC. P5N32-SLI PREMIUM
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP MCFG APIC
> acpi0: wakeup devices HUB0(S5) XVR0(S5) XVR1(S5) XVR2(S5) XVR3(S5) XVR4(S5)
> XVR5(S5) XVRA(S5) XVRB(S5) XVRC(S5) USB0(S4) USB2(S4) AZAD(S5) MMAC(S5) MAC1
> (S5) UAR1(S5) UAR2(S5) PS2M(S4) PS2K(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 266 MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz ("GenuineIntel" 686-class) 2.14
> GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 11, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 4
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 3 (HUB0)
> acpicpu0 at acpi0
> acpicpu1 at acpi0
> acpitz0 at acpi0: critical temperature 75 degC
> acpibtn0 at acpi0: PWRB
> bios0: ROM list: 0xc0000/0xec00 0xd0000/0x4000!
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 vendor "NVIDIA", unknown product 0x0071 rev
> 0xc1
> vendor "NVIDIA", unknown product 0x007f (class memory subclass RAM, rev 0xa1)
> at pci0 dev 0 function 1 not configured
> vendor "NVIDIA", unknown product 0x0075 (class memory subclass RAM, rev 0xa1)
> at pci0 dev 0 function 2 not configured
> vendor "NVIDIA", unknown product 0x006f (class memory subclass RAM, rev 0xa1)
> at pci0 dev 0 function 3 not configured
> vendor "NVIDIA", unknown product 0x00b4 (class memory subclass RAM, rev 0xa1)
> at pci0 dev 0 function 4 not configured
> vendor "NVIDIA", unknown product 0x0076 (class memory subclass RAM, rev 0xa1)
> at pci0 dev 1 function 0 not configured
> vendor "NVIDIA", unknown product 0x0078 (class memory subclass RAM, rev 0xa1)
> at pci0 dev 1 function 1 not configured
> vendor "NVIDIA", unknown product 0x0079 (class memory subclass RAM, rev 0xa1)
> at pci0 dev 1 function 2 not configured
> vendor "NVIDIA", unknown product 0x007a (class memory subclass RAM, rev 0xa1)
> at pci0 dev 1 function 3 not configured
> vendor "NVIDIA", unknown product 0x007b (class memory subclass RAM, rev 0xa1)
> at pci0 dev 1 function 4 not configured
> vendor "NVIDIA", unknown product 0x007c (class memory subclass RAM, rev 0xa1)
> at pci0 dev 1 function 5 not configured
> vendor "NVIDIA", unknown product 0x007d (class memory subclass RAM, rev 0xa1)
> at pci0 dev 1 function 6 not configured
> ppb0 at pci0 dev 2 function 0 "NVIDIA MCP04 PCIE" rev 0xa2
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x016a rev
> 0xa1
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ppb1 at pci0 dev 5 function 0 "NVIDIA MCP04 PCIE" rev 0xa2
> pci2 at ppb1 bus 2
> sili0 at pci2 dev 0 function 0 "CMD Technology SiI3132 SATA" rev 0x01: apic 4
> int 7 (irq 7)
> scsibus0 at sili0: 2 targets
> "NVIDIA MCP55 Memory" rev 0xa1 at pci0 dev 9 function 0 not configured
> pcib0 at pci0 dev 10 function 0 "NVIDIA MCP55 ISA" rev 0xa2
> nviic0 at pci0 dev 10 function 1 "NVIDIA MCP55 SMBus" rev 0xa2
> iic0 at nviic0
> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
> spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
> spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
> spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-5300CL5
> iic1 at nviic0
> adt0 at iic1 addr 0x2e: adt7475 rev 0x69
> "NVIDIA MCP55 Memory" rev 0xa2 at pci0 dev 10 function 2 not configured
> ohci0 at pci0 dev 11 function 0 "NVIDIA MCP55 USB" rev 0xa1: apic 4 int 7 (irq
> 7), version 1.0, legacy support
> ehci0 at pci0 dev 11 function 1 "NVIDIA MCP55 USB" rev 0xa2: apic 4 int 5 (irq
> 5)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
> pciide0 at pci0 dev 13 function 0 "NVIDIA MCP55 IDE" rev 0xa1: DMA, channel 0
> configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H22N, 1.01> SCSI0 5/cdrom
> removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
> pciide0: channel 1 ignored (disabled)
> pciide1 at pci0 dev 14 function 0 "NVIDIA MCP55 SATA" rev 0xa2: DMA
> pciide1: using apic 4 int 10 (irq 10) for native-PCI interrupt
> wd0 at pciide1 channel 0 drive 0: <WDC WD3200KS-75PFB0>
> wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
> wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
> wd1 at pciide1 channel 1 drive 0: <WDC WD3200KS-75PFB0>
> wd1: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
> wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
> pciide2 at pci0 dev 14 function 1 "NVIDIA MCP55 SATA" rev 0xa2: DMA
> pciide2: using apic 4 int 11 (irq 11) for native-PCI interrupt
> pciide3 at pci0 dev 14 function 2 "NVIDIA MCP55 SATA" rev 0xa2: DMA
> pciide3: using apic 4 int 5 (irq 5) for native-PCI interrupt
> ppb2 at pci0 dev 15 function 0 "NVIDIA MCP55 PCI-PCI" rev 0xa2
> pci3 at ppb2 bus 3
> vr0 at pci3 dev 6 function 0 "VIA VT6105 RhineIII" rev 0x86: apic 4 int 11
> (irq 11), address 00:17:9a:7e:ac:59
> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 4: OUI
> 0x004063, model 0x0034
> "VIA VT6306 FireWire" rev 0xc0 at pci3 dev 11 function 0 not configured
> azalia0 at pci0 dev 15 function 1 "NVIDIA MCP55 HD Audio" rev 0xa2: apic 4 int
> 5 (irq 5)
> azalia0: codec[s]: Analog Devices/0x198b
> audio0 at azalia0
> nfe0 at pci0 dev 17 function 0 "NVIDIA MCP55 LAN" rev 0xa2: apic 4 int 11 (irq
> 11), address 00:18:f3:70:21:b7
> eephy0 at nfe0 phy 19: Marvell 88E1116 Gigabit PHY, rev. 1
> nfe1 at pci0 dev 18 function 0 "NVIDIA MCP55 LAN" rev 0xa2: apic 4 int 7 (irq
> 7), address 00:18:f3:70:2a:93
> eephy1 at nfe1 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
> ppb3 at pci0 dev 19 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
> pci4 at ppb3 bus 4
> ppb4 at pci0 dev 23 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
> pci5 at ppb4 bus 5
> ppb5 at pci0 dev 24 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
> pci6 at ppb5 bus 6
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> it0 at isa0 port 0x2e/2: IT8718F rev 0x02, EC port 0x290
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
> mtrr: Pentium Pro MTRR support
> umass0 at uhub0 port 5 configuration 1 interface 0 "Genesys USB Reader" rev
> 2.00/93.17 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets
> sd0 at scsibus2 targ 1 lun 0: <Generic, STORAGE DEVICE, 9317> SCSI0 0/direct
> removable
> sd0: drive offline
> sd1 at scsibus2 targ 1 lun 1: <Generic, STORAGE DEVICE, 9317> SCSI0 0/direct
> removable
> sd1: drive offline
> ugen0 at uhub0 port 9 "Realtek RTL8187" rev 2.00/1.00 addr 3
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> umass1 at uhub0 port 8 configuration 1 interface 0 "Flash Drive AL_USB20" rev
> 2.00/2.00 addr 4
> umass1: using SCSI over Bulk-Only
> scsibus3 at umass1: 2 targets
> sd2 at scsibus3 targ 1 lun 0: <Flash, Drive AL_USB20, 1.00> SCSI2 0/direct
> removable
> sd2: 3974MB, 506 cyl, 255 head, 63 sec, 512 bytes/sec, 8139776 sec total
> sd2 detached
> scsibus3 detached
> umass1 detached
>
>
> --
> Vijay Sankar, M.Eng., P.Eng.
> President & CEO
> ForeTell Technologies Limited
> 59 Flamingo Avenue, Winnipeg, MB Canada R3J 0X6
> Phone: +1 204 885 9535, E-Mail: [EMAIL PROTECTED]
